EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7. Call Overview<br />
This chapter will give you basic details on how to setup the CALL MENU on the DVR. Press the<br />
CALL key and the CALL MENU will pop up as below.<br />
Diagram 7.1<br />
In CALL MENU, you can change the following settings for the call monitor:<br />
Chapter<br />
7<br />
1. SEQ: Sequence display on the call monitor. Press SEQ key to switch the sequence status<br />
“ON” or “OFF”.<br />
2. OSD: Channel name display on the call monitor. Press DISPLAY key to switch the OSD<br />
status “ON” or “OFF”.<br />
3. CAMERA: The current display camera in the call monitor. Press Channel NO to set display<br />
camera.<br />
4. QUAD DISPLAY<br />
YES (CAMERA: 01~04): select YES to enable quad display of call monitor. For 8 CH model<br />
DVR, press CH 2 button to show camera 05~08 in quad display.<br />
NO: Select NO to disable quad display of call monitor.
Change language