EDR810H/EDR810M EDR410H/EDR410M - EverFocus

4.3 Event Recording Setup
We will define two event recording types ALARM and MOTION. After the event recording is
enabled, the DVR will start an event recording when an event occurs. For instance when motion
activity is detected by the DVR it will begin recording at the specific IPS set under event column. Or
when an alarm is detected by the DVR it will begin recording at the specific IPS set under event
column.
In order to start an event recording, you will NEED to perform the following:
1. Enable the event in each setting (Alarm or Motion Menu) first. For example, enable Camera 1 in
the MOTION SETUP MENU (as shown below). You can enable multiple alarm or motion
triggers.
Diagram 4.2