EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4. UPDATE SYSTEM SOFTWARE: Turn the jog to enter the selection window.<br />
YES: Select YES to update system software from USB and press SELECT to start.<br />
NO: Select NO and press SELECT to cancel update.<br />
Note:<br />
- System will ask you to stop recording before you can update the system.<br />
-USB device must be inserted properly before updating system software.<br />
-Do not remove USB device when you are updating system software as this can cause the machine<br />
to crash.<br />
-Power failure or machine being turned off during updating process may result an abnormal start<br />
up of the machine.<br />
-After upgrading system software, please do the following actions before recording:<br />
1) Load System Default in System Setup Menu.<br />
2) Delete disk in Disk Setup Menu.<br />
5. LANGUAGE: System language can be set in different languages. The available languages depend<br />
on the country or area. Subject to change without further notice. Please consult your sales<br />
representative for the most up to date information.<br />
6. QUICK PLAY: Allows the user to press the play button and playback video from the time<br />
indicated from this field (0 ~ 59 Min).<br />
ON: Enable quick play. Videos will begin playing back from the indicated time previous to current<br />
recording.<br />
OFF: Disable quick play. Videos will begin playing back from the end point of the last playback.<br />
TIME: Quick play time, from 1 ~ 59 min. The default value is 10 minutes.<br />
Note: The minimum recommended quick play time is 10 minutes. If you set a quick play time<br />
less than this, the video may not be played because it is still in HDD temporary storage.<br />
7. SYSTEM PASSWORD ENABLE:<br />
YES: Select YES to enable the password function.<br />
NO: Select NO to disable the password function.