EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.12 System Setup Menu<br />
Diagram 3.24<br />
Diagram 3.24 is a screen shot of the SYSTEM SETUP MENU. This menu is for setting up any<br />
additional options and restoring defaults to the digital recorder. In the SYSTEM SETUP MENU the<br />
following fields are defined as follows:<br />
1. SYSTEM VERSION: Current system firmware version.<br />
2. SYSTEM VIDEO FORMAT: NTSC or PAL. System can detect the input signal type<br />
automatically from camera 1 while system is booting up. Users do not need to set it up.<br />
Note: Camera 1 input must be connected in order to auto-detect video format.<br />
3. LOAD/SAVE CONFIGURATION:<br />
YES: Turn the jog to enter the selection window, there are 4 options available: CANCEL,<br />
DEFAULT, LOAD, and SAVE. Select “CANCEL” to exit the window. Select “DEFAULT” to<br />
load factory default values. Select “LOAD” to upload DVR configuration settings from USB.<br />
Select “SAVE” to save existing DVR configuration settings to USB device. Press “SELECT”<br />
button from the front panel to confirm once the selection is made. Note that a USB device has to<br />
be inserted properly before choosing “LOAD” or “SAVE” options. System will ask you to stop<br />
recording before you can load defaults, load saved settings, or save existing settings.<br />
NO: Press “ENTER” to move past “LOAD/SAVE CONFIGURATION”.