EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. ALARM OUTPUT: This will transmit a signal to another device. The setting of alarms are<br />
NONE = not activated, 1 = output signal 1 transmitted. To change this, simply use the Jog Dial<br />
on the DVR.<br />
3. ALARM DURATION: Permanent, this setting cannot be changed.<br />
4. NETWORK ALARM:<br />
YES: To enable network alarm.<br />
NO: To disable network alarm.<br />
5. SEND EMAIL:<br />
YES: Send an email when HDD’s temperature is overheated.<br />
NO: Will not send an email when HDD’s temperature is overheated.<br />
The email address can be set in the NETWORK SETUP MENU.<br />
6. STOP RECORD:<br />
YES: Stop recording when HDD’s temperature is overheated.<br />
NO: Will not stop recording even when HDD’s temperature is overheated.<br />
7. SET TEMPERATURE:<br />
It is possible to set temperature. When HDD’s temperature is higher than the degree you set, then<br />
all other settings in HDD TEMP. will take effect (BUZZER, ALARM OUTPUT, ALARM<br />
DURATION, NETWORK ALARM, SEND EMAIL, STOP RECORD).
Change language