EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus EDR810H/EDR810M EDR410H/EDR410M - EverFocus
5. ALARM EMAIL: Select “YES” for sending an email when video loss occurs. The email address can be set in the NETWORK SETUP MENU. 6. BUZZER: Audible alarm buzzer. ENABLE: To enable a video loss buzzer. DISABLE: To disable a video loss buzzer. 7. ALARM NETWORK: YES: Enable alarm network. NO: Disable alarm network. 8. SUMMARY: All video loss’s statuses are shown in SUMMARY tables. These tables are for checking video loss overall statuses, but not for changing them.
3.7 Network Setup Menu Diagram 3.10 Diagram 3.10 is a screen shot of the NETWORK SETUP MENU. This menu is for setting up the configurations for networking to the DVR. There are 6 subentries that are CONFIG, ALARM, EMAIL, PASSWORD, PPPoE and DDNS in the NETWORK SETUP MENU. Mobile units will also have the WIRELESS and GPS features available. Please refer to the Networking Chapter of this manual to fully understand how to setup your network for this DVR. In the Network Setting Menu the following fields are defined as follows: Note: Since every Network Configuration is different, please contact your Network Administrator or ISP for details on how to assign those IP addresses and port numbers. 3.7.1 CONFIG In the CONFIG of the NETWORK SETUP MENU, we define: 1. IP CONFIG: FIXED IP: User can manually set the IP address for network connection. DHCP: DHCP server in LAN will automatically provide the IP address for network connection. When you choose this option, the numbers will be faded out. PPPoE: This is a DSL connection application. ISP will ask user to input user name and password. When you choose this option, please configure settings in the PPPoE options first.
- Page 1 and 2: Instruction Manual EDR810H/EDR810M
- Page 3: Federal Communication Commission In
- Page 6 and 7: 4.2 SCHEDULE RECORDING SETUP.......
- Page 8 and 9: Safety Warning WARNING TO REDUCE RI
- Page 10 and 11: Safety Precautions Read Instructio
- Page 12 and 13: 1.2 Specifications Video format NTS
- Page 14 and 15: 9 FULL: Press this key and channel
- Page 16 and 17: 1.4 Back Panel Connections Back pan
- Page 18 and 19: LAN 7 LAN Connector: RJ-45 network
- Page 20 and 21: 1 Channel tag: A channel tag indica
- Page 22 and 23: 3. Event The current/last event tha
- Page 24 and 25: 2.1 Basic Wiring Instructions Pleas
- Page 26 and 27: 2.2 Hard Disk Drive Installation Th
- Page 28 and 29: Unpack Everything Make sure you hav
- Page 30 and 31: Possible Installation Locations Ins
- Page 32 and 33: 3. DVR Menu Setup Assuming you have
- Page 34 and 35: 5. DAYLIGHT SAVING: This field repr
- Page 36 and 37: Alaska Standard Time subtract 9 hou
- Page 38 and 39: 4. SEQ (MAIN/CALL): Set the number
- Page 40 and 41: 7. SUMMARY: Diagram 3.5 Dial Jog to
- Page 42 and 43: 4. WATER MARK: ON: Recording is ove
- Page 44 and 45: 3. LOG: ON: Select ON if you wish t
- Page 46 and 47: 3.5 Motion Setup Menu Diagram 3.8 D
- Page 48 and 49: To edit a MOTION AREA, enter a desi
- Page 52 and 53: 2. IP Address This field shows the
- Page 54 and 55: 3.7.2 ALARM NETWORK DVR can send ou
- Page 56 and 57: 7. SENDER EMAIL ADDR Input sender
- Page 58 and 59: Shared: need shared key. WEP: uses
- Page 60 and 61: 3.7.7 DDNS In DDNS of the NETWORK S
- Page 62 and 63: 3.7.8 GPS In GPS of the NETWORK SET
- Page 64 and 65: 3. END: This field is used to set t
- Page 66 and 67: 2. THERMOMETRIC SCALE: Select CELSI
- Page 68 and 69: RS485: 5. RS485 Baud Rate: This fie
- Page 70 and 71: 4. NETWORK ALARM: YES: To enable ne
- Page 72 and 73: 3.11.3 NO HDD In NO HDD, we define:
- Page 74 and 75: 4. NETWORK ALARM: YES: To enable ne
- Page 76 and 77: 4. UPDATE SYSTEM SOFTWARE: Turn the
- Page 78 and 79: 4. Recording Overview Before contin
- Page 80 and 81: 4.3 Event Recording Setup We will d
- Page 82 and 83: Note: 1. If you only want to record
- Page 84 and 85: (3) Fast Forward/Reverse Playback P
- Page 86 and 87: 5.2 Search Playback SEARCH Press th
- Page 88 and 89: The event types and number show on
- Page 90 and 91: In the COPY MENU, we define: Diagra
- Page 92 and 93: 7. Call Overview This chapter will
- Page 94 and 95: When turning SHARPNESS OFF, the ima
- Page 96 and 97: 09 10. Networking Overview This cha
- Page 98 and 99: Note: Everfocus suggests having a m
3.7 Network Setup Menu<br />
Diagram 3.10<br />
Diagram 3.10 is a screen shot of the NETWORK SETUP MENU. This menu is for setting up the<br />
configurations for networking to the DVR. There are 6 subentries that are CONFIG, ALARM,<br />
EMAIL, PASSWORD, PPPoE and DDNS in the NETWORK SETUP MENU. Mobile units will<br />
also have the WIRELESS and GPS features available. Please refer to the Networking Chapter of this<br />
manual to fully understand how to setup your network for this DVR. In the Network Setting Menu the<br />
following fields are defined as follows:<br />
Note: Since every Network Configuration is different, please contact your Network Administrator<br />
or ISP for details on how to assign those IP addresses and port numbers.<br />
3.7.1 CONFIG<br />
In the CONFIG of the NETWORK SETUP MENU, we define:<br />
1. IP CONFIG:<br />
FIXED IP: User can manually set the IP address for network connection.<br />
DHCP: DHCP server in LAN will automatically provide the IP address for network connection.<br />
When you choose this option, the numbers will be faded out.<br />
PPPoE: This is a DSL connection application. ISP will ask user to input user name and<br />
password. When you choose this option, please configure settings in the PPPoE options first.
Change language