EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4. DURATION: The amount of time a motion event will record - from 1 sec to 99 seconds. The<br />
default value is 5 seconds. To change this, simply use the Jog Dial on the DVR.<br />
5. ALARM OUTPUT: This will transmit a signal to another device. The setting of alarms are<br />
NONE = not activated, 1 = output signal 1 transmitted. To change this, simply use the Jog Dial<br />
on the DVR.<br />
6. ALARM EMAIL:<br />
YES: Send an email when motion occurs.<br />
NO: Do not send an email when motion occurs.<br />
The email address and e-mail server can be set in the NETWORK SETUP MENU.<br />
7. ALARM NETWORK:<br />
YES: Enable alarm network when motion occurs.<br />
NO: Disable alarm network when motion occurs.<br />
8. BUZZER: Audible buzzer when motion is detected.<br />
ENABLE: To enable a motion buzzer.<br />
DISABLE: To disable a motion buzzer.<br />
9. MOTION DELAY:<br />
Select motion delay time from 0~7 level.<br />
10. MAIN MON: Display on a main monitor when an alarm occurs.<br />
NO CHANGE: No change on the display in the main monitor when a motion occurs.<br />
FULLSCREEN: A full screen of the active camera will display when motion occurs.<br />
11. CALL MON: Display on a call monitor when motion occurs.<br />
NO CHANGE: No change on the display in the main monitor when motion occurs.<br />
CAMERA 1~8: Display the active camera in full screen mode to the call monitor.<br />
12. SUMMARY: Dial Jog to scroll through options in the SUMMARY table. All alarm’s statuses<br />
are shown in SUMMARY tables. These tables are for checking alarm overall statuses, but not<br />
for changing them.
Change language