EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.4 Alarm Setup Menu<br />
Diagram 3.7<br />
Diagram 3.7 is a screen shot of the ALARM SETUP MENU. An alarm is defined as an electrical,<br />
electronic, or mechanical device that sends an alert by means of a signal. In this case the signal<br />
triggers the recorder to start recording the alarmed event. This menu contains all the alarm operations<br />
and options needed to successfully set up an alarm recording. In the ALARM SETUP MENU the<br />
following fields are defined as:<br />
1. ALARM: This field is to turn alarm recording on or off. The Default from the factory is set to<br />
Enable. To change this, simply use the Jog Dial on the DVR.<br />
ENABLE: Enable alarm detection.<br />
DISABLE: Disable alarm detection.<br />
2. ALARM TYPE: This field is to set the type of alarm connection. The Default from the factory is<br />
set to N.O. To change this, simply use the Jog Dial on the DVR.<br />
N. O.: Normal Open alarm.<br />
N. C.: Normal Close alarm.<br />
N.O. Trans.: When the alarm is triggered, buzzer starts to function no matter how long the alarm<br />
duration is set until you set it back to N.O.<br />
N.C. Trans.: When the alarm is triggered, buzzer starts to function no matter how long the alarm<br />
duration is set until you set it back to N.C.
Change language