EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4. WATER MARK:<br />
ON: Recording is overlaid by a visible watermark (“W”).<br />
OFF: No watermark.<br />
5. RESOLUTION: The resolutions for NTSC are 720x480, 720x240 and 360x240; the default<br />
value is 720x240. The resolutions for PAL are 720x576, 720x288 and 360x288; the default value<br />
is 720x288.<br />
NOTE: The resolution determines the maximum record speed supported by the DVR.<br />
NTSC<br />
720x480 = 30 IPS (this IPS value is divided by the amount of cameras installed)<br />
720x240 = 60 IPS (this IPS value is divided by the amount of cameras installed)<br />
360x240 = 120 IPS (this IPS value is divided by the amount of cameras installed)<br />
6. RECORD MODE:<br />
REWRITE: Continue recording. Disk will begin overwriting if it is full.<br />
STOP: Stop recording when disk is full.<br />
7. AUTOWRITE WITHIN: You can set DVR to automatically overwrite after the selected<br />
number of days. If you do not wish to use this function, simply select “0”.<br />
8. PRE-ALARM RECORDING<br />
Select “YES” to enable pre-alarm recording function. Select “NO” to disable pre-alarm recording<br />
function.<br />
9. RELAY OUT<br />
By selecting “1”, user can easily identify whether DVR is recording or not if relay output is<br />
connected to a signaling device. Select “NONE” if you do not wish to identify recording status.
Change language