EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.2 Hard Disk Drive Installation<br />
The first step in installing the hard drive is to insert the hard drive sleeve into the machine. The hard<br />
disk drive default setting is initially set to master. The second step is to insert the key provided and turn<br />
the tray key to the lock position. If this process is ignored the hard disk drive will not be detected.<br />
Note: If the Hard Disk Drive is not locked in with the key, HDD LED will not light<br />
up and the DVR will not go into record mode. This is because the Hard Drive is<br />
not being recognized.<br />
Note: After powering on the DVR, it will start to load system. It takes a while to<br />
complete loading system, during this time, please do not install or remove the hard<br />
disk. No action is recommended while the machine is loading system.<br />
Diagram 2.2 shows 3.5“ Hard Drive<br />
2.3 Final Install Process<br />
Once you have completed the basic wiring installation and the hard disk drive installation you are ready<br />
to turn on the DVR. Simply plug the power source you installed earlier. The POWER LED lights will<br />
light up if power is normal. The next step is to set up the menu options for the DVR.