EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.1 Basic Wiring Instructions<br />
Please refer to diagram 2.1 to assist you with this portion of the installation.<br />
1. Power<br />
Connect the power source or adapter into the power socket.<br />
2. Cameras<br />
Connect each cameras video output to the video inputs on the digital video recorder.<br />
Note: At least one camera must be connected before the system is running for the auto detection of<br />
video standard to take effect.<br />
3. Audio Input<br />
The camera audio output or Microphone is connected to the audio input terminal at the rear panel.<br />
4. Audio Output<br />
Connect the speaker or other audio listening devices to the audio output terminal on the back of the<br />
digital video recorder.<br />
5. Ethernet<br />
The digital video recorder may be viewed from a PC via the LAN connector using a RJ45 Ethernet<br />
cable.<br />
6. RS485<br />
The digital video recorder can be controlled from an EKB500 keyboard via RS485.<br />
Note: This can be done using a RJ45-to-serial cable.<br />
7. Main Monitor<br />
Connect a monitor to the main monitor output connector. The main monitor displays live or<br />
recorded cameras in any available format.<br />
Note: The main monitor must be connected in order to make configuration changes, enter the main<br />
menu, or do a playback at the machine.
Change language