EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus EDR810H/EDR810M EDR410H/EDR410M - EverFocus
SCHEDULE setup menu CONTROL setup menu
WARNING setup menu SYSTEM setup menu All recording should be stopped before making any changes on this menu. Update Firmware 1. After clicking Apply, an “Open File” window appears. 2. Find the folder where the firmware upgrade is saved and choose Open. 3. On the DVR’s monitor, you will see a notice that the firmware is being updated. Note: DO NOT try to open the menu or make changes at the DVR while this process is happening. 4. When the update is complete, the DVR will reboot automatically. 5. Once “Load System” has finished, the system’s software will be updated. You will need to refresh the network viewer for the changes to take effect. Load/Save Configuration 1. Clicking Save will open a “Save File window. 2. Select the folder you wish to save the configuration file to and then choose Save. 3. Clicking Load will open an “Open File” window. 4. Find the folder where your configuration file is saved and then choose Open.
- Page 90 and 91: In the COPY MENU, we define: Diagra
- Page 92 and 93: 7. Call Overview This chapter will
- Page 94 and 95: When turning SHARPNESS OFF, the ima
- Page 96 and 97: 09 10. Networking Overview This cha
- Page 98 and 99: Note: Everfocus suggests having a m
- Page 100 and 101: 10.7 Simple One to One Connection C
- Page 105 and 106: Once you have reached this point cl
- Page 107 and 108: Now Log into the EverFocus DVR menu
- Page 109 and 110: Connection Procedure: The First st
- Page 111 and 112: 11. Linksys Port Forwarding Chapter
- Page 113 and 114: application. Enable - Click the Ena
- Page 115 and 116: 12. D-Link Port Forwarding Chapter
- Page 117 and 118: Name - Enter the name referencing t
- Page 119 and 120: 13. EverFocus DDNS Setup Note: You
- Page 121 and 122: 14. Viewing through Internet Explor
- Page 123 and 124: Click the Security tab at the top,
- Page 125 and 126: The followings are a brief descript
- Page 127 and 128: 14.1 SEARCH 14.1.1 Search by Time T
- Page 129 and 130: 14.2 PTZ control 1. Select the PTZ
- Page 131 and 132: 1) Press on the M button to change
- Page 133 and 134: III. Open the DVRViewer.exe for loa
- Page 135 and 136: 14.4 Remote Configuration Click on
- Page 137 and 138: CAMERA setup menu RECORD setup menu
- Page 139: NETWORK 1 setup menu The Network Co
- Page 143 and 144: 15.2 Remote Control Protocol A comp
- Page 145 and 146: 0x23 CH8 0x24 (reserve) 0x25 (reser
- Page 147 and 148: Appendix B: Alarm Board Configurati
- Page 149 and 150: Troubleshooting If you have difficu
WARNING setup menu<br />
SYSTEM setup menu<br />
All recording should be stopped before making any changes on this menu.<br />
Update Firmware<br />
1. After clicking Apply, an “Open File” window appears.<br />
2. Find the folder where the firmware upgrade is saved and choose Open.<br />
3. On the DVR’s monitor, you will see a notice that the firmware is being updated.<br />
Note: DO NOT try to open the menu or make changes at the DVR while this<br />
process is happening.<br />
4. When the update is complete, the DVR will reboot automatically.<br />
5. Once “Load System” has finished, the system’s software will be updated. You will need<br />
to refresh the network viewer for the changes to take effect.<br />
Load/Save Configuration<br />
1. Clicking Save will open a “Save File window.<br />
2. Select the folder you wish to save the configuration file to and then choose Save.<br />
3. Clicking Load will open an “Open File” window.<br />
4. Find the folder where your configuration file is saved and then choose Open.