EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus EDR810H/EDR810M EDR410H/EDR410M - EverFocus
14.1.2 Search by EVENT 1. Select Event Type from Alarm, Motion and Vloss. Note: At least one event type must stay checked. 2. Select the Disk No. from which you would like to search events. 3. Press Update button to refresh the event list. 4. All events of the selected type will be displaying along with Date/Time, event type (represented by a capital letter), and camera number (represented by a number) For example, M02 is a motion event from camera 2. 5. When there is a “+” sign in front of the date with page number at the end, double-click to show all the events of that page. 6. Press Play button to playback the selected event. 7. Press Stop button to stop playback.
14.2 PTZ control 1. Select the PTZ camera you wish to control from drop-down menu. 2. Select Action Mode you want to use. There are 4 options available: Continuous, Step x10, Step x5 and Step x1. 3. Use Direction Arrows (up, down, left, right) to move/adjust the focus to your desired direction and angle. 4. Press Z+ for Zooming In or Z- for Zooming Out. 5. In Focus option, press Near to move the focus closer to the subject or press Far to move the focus farther from the subject. 6. You can turn on the Iris by pressing Open or turn it off by pressing Close. 7. “Click to Preset Point” helps you to define the preset point you want the camera to look at. Press Set to confirm, Clear to delete or Jump to jump to a specific point. 8. “Auto Pan” is to define the speed of PTZ camera when moving horizontally. Choose from Slower, Slow, Normal, Fast to Faster. Press Run to start or Stop to end. 9. “A/B Point Scan” allows you to set a tour between 2 points. Move to the first point by using direction arrows and press SET A. Then move to the second point by using direction arrows and press SET B. Press RUN to start A/B Point Scan.
- Page 78 and 79: 4. Recording Overview Before contin
- Page 80 and 81: 4.3 Event Recording Setup We will d
- Page 82 and 83: Note: 1. If you only want to record
- Page 84 and 85: (3) Fast Forward/Reverse Playback P
- Page 86 and 87: 5.2 Search Playback SEARCH Press th
- Page 88 and 89: The event types and number show on
- Page 90 and 91: In the COPY MENU, we define: Diagra
- Page 92 and 93: 7. Call Overview This chapter will
- Page 94 and 95: When turning SHARPNESS OFF, the ima
- Page 96 and 97: 09 10. Networking Overview This cha
- Page 98 and 99: Note: Everfocus suggests having a m
- Page 100 and 101: 10.7 Simple One to One Connection C
- Page 105 and 106: Once you have reached this point cl
- Page 107 and 108: Now Log into the EverFocus DVR menu
- Page 109 and 110: Connection Procedure: The First st
- Page 111 and 112: 11. Linksys Port Forwarding Chapter
- Page 113 and 114: application. Enable - Click the Ena
- Page 115 and 116: 12. D-Link Port Forwarding Chapter
- Page 117 and 118: Name - Enter the name referencing t
- Page 119 and 120: 13. EverFocus DDNS Setup Note: You
- Page 121 and 122: 14. Viewing through Internet Explor
- Page 123 and 124: Click the Security tab at the top,
- Page 125 and 126: The followings are a brief descript
- Page 127: 14.1 SEARCH 14.1.1 Search by Time T
- Page 131 and 132: 1) Press on the M button to change
- Page 133 and 134: III. Open the DVRViewer.exe for loa
- Page 135 and 136: 14.4 Remote Configuration Click on
- Page 137 and 138: CAMERA setup menu RECORD setup menu
- Page 139 and 140: NETWORK 1 setup menu The Network Co
- Page 141 and 142: WARNING setup menu SYSTEM setup men
- Page 143 and 144: 15.2 Remote Control Protocol A comp
- Page 145 and 146: 0x23 CH8 0x24 (reserve) 0x25 (reser
- Page 147 and 148: Appendix B: Alarm Board Configurati
- Page 149 and 150: Troubleshooting If you have difficu
14.1.2 Search by EVENT<br />
1. Select Event Type from Alarm, Motion and Vloss.<br />
Note: At least one event type must stay checked.<br />
2. Select the Disk No. from which you would like to search events.<br />
3. Press Update button to refresh the event list.<br />
4. All events of the selected type will be displaying along with Date/Time, event type<br />
(represented by a capital letter), and camera number (represented by a number)<br />
For example, M02 is a motion event from camera 2.<br />
5. When there is a “+” sign in front of the date with page number at the end, double-click to show<br />
all the events of that page.<br />
6. Press Play button to playback the selected event.<br />
7. Press Stop button to stop playback.
Change language