EDR810H/EDR810M EDR410H/EDR410M - EverFocus
EDR810H/EDR810M EDR410H/EDR410M - EverFocus EDR810H/EDR810M EDR410H/EDR410M - EverFocus
Once you have enabled it enter the server address of DynDNS.org: members.dyndns.org Then enter the hostname you created with DynDNS.org Example: Everfocus.homeip.net Then enter the username and password you use to log into DynDNS.org
13. EverFocus DDNS Setup Note: You MUST have firmware version 1.6.2 or higher in order to use the EverFocus DDNS server. Set up the Network Menu according to the instructions detailed in the Networking chapter. Go to the website http://everfocusddns.com and check for an available name. Chapter 13 In DVR’s Network Menu, go to DDNS. Choose “everfocusddns.com” for the Server and put in your chosen name for DVR Name.
- Page 68 and 69: RS485: 5. RS485 Baud Rate: This fie
- Page 70 and 71: 4. NETWORK ALARM: YES: To enable ne
- Page 72 and 73: 3.11.3 NO HDD In NO HDD, we define:
- Page 74 and 75: 4. NETWORK ALARM: YES: To enable ne
- Page 76 and 77: 4. UPDATE SYSTEM SOFTWARE: Turn the
- Page 78 and 79: 4. Recording Overview Before contin
- Page 80 and 81: 4.3 Event Recording Setup We will d
- Page 82 and 83: Note: 1. If you only want to record
- Page 84 and 85: (3) Fast Forward/Reverse Playback P
- Page 86 and 87: 5.2 Search Playback SEARCH Press th
- Page 88 and 89: The event types and number show on
- Page 90 and 91: In the COPY MENU, we define: Diagra
- Page 92 and 93: 7. Call Overview This chapter will
- Page 94 and 95: When turning SHARPNESS OFF, the ima
- Page 96 and 97: 09 10. Networking Overview This cha
- Page 98 and 99: Note: Everfocus suggests having a m
- Page 100 and 101: 10.7 Simple One to One Connection C
- Page 105 and 106: Once you have reached this point cl
- Page 107 and 108: Now Log into the EverFocus DVR menu
- Page 109 and 110: Connection Procedure: The First st
- Page 111 and 112: 11. Linksys Port Forwarding Chapter
- Page 113 and 114: application. Enable - Click the Ena
- Page 115 and 116: 12. D-Link Port Forwarding Chapter
- Page 117: Name - Enter the name referencing t
- Page 121 and 122: 14. Viewing through Internet Explor
- Page 123 and 124: Click the Security tab at the top,
- Page 125 and 126: The followings are a brief descript
- Page 127 and 128: 14.1 SEARCH 14.1.1 Search by Time T
- Page 129 and 130: 14.2 PTZ control 1. Select the PTZ
- Page 131 and 132: 1) Press on the M button to change
- Page 133 and 134: III. Open the DVRViewer.exe for loa
- Page 135 and 136: 14.4 Remote Configuration Click on
- Page 137 and 138: CAMERA setup menu RECORD setup menu
- Page 139 and 140: NETWORK 1 setup menu The Network Co
- Page 141 and 142: WARNING setup menu SYSTEM setup men
- Page 143 and 144: 15.2 Remote Control Protocol A comp
- Page 145 and 146: 0x23 CH8 0x24 (reserve) 0x25 (reser
- Page 147 and 148: Appendix B: Alarm Board Configurati
- Page 149 and 150: Troubleshooting If you have difficu
13. <strong>EverFocus</strong> DDNS Setup<br />
Note: You MUST have firmware version 1.6.2 or higher in order to use the<br />
<strong>EverFocus</strong> DDNS server.<br />
Set up the Network Menu according to the instructions detailed in the Networking chapter.<br />
Go to the website http://everfocusddns.com and check for an available name.<br />
Chapter<br />
13<br />
In DVR’s Network Menu, go to DDNS. Choose “everfocusddns.com” for the Server and put<br />
in your chosen name for DVR Name.
Change language