PowerFocus user manual EN - Everfocus
PowerFocus user manual EN - Everfocus
PowerFocus user manual EN - Everfocus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
11.6 Auto Mode Settings<br />
Click the Auto Mode Settings, and the following panel displays.<br />
Figure 11-10<br />
64<br />
PowerVideo Plus<br />
Freeze Picture: This function can be used in conjunction with the Preset function. If you<br />
select On, the camera will directly jump to the selected position without moving. If you<br />
select Off, the camera will move to the selected position.<br />
Auto Resume: Activate this setting to return the camera to the previous mode, if no action<br />
has occurred for a selectable period of time. Available options include After 0.5 M (minute),<br />
Afetr 1 M, After 5 M, After 10 M, After 30 M, After 60 M, and OFF (deactivate this function).<br />
After the selected period, the camera will revert to the mode you set in the “Resume To”<br />
field below.<br />
Resume To: Select the mode that the camera will return to, if you have configured the Auto<br />
Resume field above. Available options are POS.1 (H) (the Preset position “1”), TOUR1, PAT.1<br />
(Pattern “1”), AUTO PAN and PREV.MODE (the previous mode the camera was in).<br />
Power Up Func.: Select the mode that the system will revert to when a power failure occurs.<br />
Available options of this field are OFF, POS.1 (H) (the Preset position “1”), TOUR.1, PAT.1<br />
(Pattern “1”), AUTO PAN and PREV.MODE.
Change language