PowerFocus user manual EN - Everfocus

11.5 Set Tour
62
PowerVideo Plus
You can combine up to 16 preconfigured camera positions and patterns into one long
sequence. Up to 16 Tour sequences can be set up.
To set up a Tour Sequence:
1. Click the Set Tour, the following Tour panel appears.
Figure 11-8
2. Select a number from the Tour No drop-down list.
3. To set up the first position for Tour No.1, select OFF, Preset or Pattern in the Mode field.
Figure 11-9
4. Enter a Preset No. or Pattern No. in the Value field.
5. Enter a dwell time that the Tour will pause at a Preset position or after a Pattern
sequence.
6. Enter a speed at which the camera will move to the Preset position or first point of the
Pattern sequence.