PowerFocus user manual EN - Everfocus

More documents

Recommendations

Info

Chapter 4 Recording 22 PowerVideo Plus You can record live videos from the connected IP cameras to the computer. Click the Start Record button on the Live View Tool Bar to start / stop recording the camera live view. The recordings can be played back using the internal built-in player. Please refer to Chapter 6, Remote Playback. Figure 4-1 4.1 Changing the Recording Path Live View Tool Bar for IP camera By default, the live view recordings of the IP cameras are saved at C:\Program Files\<strong>Everfocus</strong>\PowerVideo Plus\<strong>Everfocus</strong>\Recordings. Follow the steps below to change the recording path. 1. On the Main Screen, click Option and click Configure Record Storage Path. Figure 4-2
23 PowerVideo Plus 2. Click the Record Storage Path tab, click the Add New Path button and select a storage location. The new path will be listed in the storage path list. Figure 4-3 3. Double click on the added path to enable it as the default path. The color of the wordings will change from black to red to indicate the path has set up as the default path. Figure 4-4 4. You can optionally enable Recording file (s) overwrite, if disk drive is full. 5. Click the Save button to save the settings.
Page 1 and 2: PowerVideo Plus EverFocus Central M
Page 3 and 4: Contents Chapter 1 Introduction ...
Page 5 and 6: Chapter 1 Introduction 1 PowerVideo
Page 7 and 8: To activate the license: 3 PowerVid
Page 9 and 10: 2.2 Main Screen 10 11 1 2 3 4 5 6 7
Page 11 and 12: Note: 7 PowerVideo Plus 1. You can
Page 13 and 14: 2.4 Device List 9 PowerVideo Plus T
Page 15 and 16: 11 PowerVideo Plus 4. To add IP dev
Page 17 and 18: To change the password: 1. Click th
Page 19 and 20: 3.1 Matrix View 15 PowerVideo Plus
Page 21 and 22: 3.2 Floating Matrix 17 PowerVideo P
Page 23 and 24: 19 PowerVideo Plus 1. On the Main S
Page 25: 3.5 OSD Settings 21 PowerVideo Plus
Page 29 and 30: 5.1 Remote Archive 25 PowerVideo Pl
Page 31 and 32: For NVR: 27 PowerVideo Plus 1. Sele
Page 33 and 34: Chapter 6 Remote Playback 29 PowerV
Page 35 and 36: 7.1 Activating the Dynamic E-Maps 3
Page 37 and 38: To pop up an SOP panel: 33 PowerVid
Page 39 and 40: 35 PowerVideo Plus When any of the
Page 41 and 42: Creating Holidays 37 PowerVideo Plu
Page 43 and 44: Creating Holidays 39 PowerVideo Plu
Page 45 and 46: Chapter 10 Alarm Settings 41 PowerV
Page 47 and 48: • On the Web interface of the IP
Page 49 and 50: 10.2 Configuring the Notification S
Page 51 and 52: 10.2.2 Alarm Input Figure 10-10 Dev
Page 53 and 54: 10.2.3 Video Loss This function is
Page 55 and 56: 10.2.4 Fan Failure / HD Temperature
Page 57 and 58: 10.2.5 E-Mail Server Settings Figur
Page 59 and 60: Chapter 11 PTZ Control 55 PowerVide
Page 61 and 62: To bring up the PTZ Settings panel,
Page 63 and 64: 59 PowerVideo Plus To activate the
Page 65 and 66: 11.4 Set Pattern 61 PowerVideo Plus
Page 67 and 68: 7. Follow Step 3 to 6 to configure
Page 69 and 70: 65 PowerVideo Plus Auto Flip: Selec
Page 71 and 72: 12.1 Activating GPS Tracking Functi
Page 73 and 74: 12.2 Playing Back GPS Tracks 69 Pow
Page 75 and 76: Chapter 13 Backup Utility 71 PowerV
Page 77 and 78:
Chapter 14 Bandwidth Monitor 73 Pow
Page 79 and 80:
15.2 Temporarily Disconnecting (Mob
show all

PowerFocus user manual EN - Everfocus

Create successful ePaper yourself

Delete template?

Save as template?