ED550 MANUAL
ED550 MANUAL ED550 MANUAL
5.6 DNR (Dynamic Noise Reduction) Dynamic Noise Reduction in video images has the following effects. 1. Images are brighter and sharper. 2. When the level of noise is reduced, the performance of a camera can apparently be improved. 3. When it is recorded digitally, reduced noise can reduce image file size. As the level of gain changes, the background noise in the low light level automatically decreases. 1. Please direct the arrow to point to “DNR” on the SETUP menu by adjusting the switch to UP or DOWN direction. 2. Select the mode you would like to operate by adjusting the switch to LEFT or RIGHT direction. OFF: No reduction in noise level. LOW: Little reduction in noise level with nearly no ghost image. Default value is LOW. MIDDLE: Just enough reduction in noise levels without causing much ghost imaging. HIGH: Huge reduction in noise level, which may cause much ghost imaging. 5.7 SENS-UP SETUP LENS DC DNR LOW SENS-UP AUTO
OFF: The function is disabled. 2. Press SET button when you finish all the settings. 5.8 Special SETUP LENS DC SENS-UP AUTO
- Page 1 and 2: EVERFOCUS 560 TVL True Day/Night In
- Page 3 and 4: 5.8.7 SHARPNESS ...................
- Page 5 and 6: 1.3 Specifications Pickup Device 1/
- Page 7 and 8: - 7 -
- Page 9 and 10: 3. INSTALLATION Take off camera's c
- Page 11 and 12: 4.2 Display/Close the user setup me
- Page 13 and 14: SETUP LENS MANUAL > SHUTTER FLK WHI
- Page 15: 5.4 Backlight Even there is a massi
- Page 19 and 20: 5.8.2 COLOR ADJ Adjust the Color Ga
- Page 21 and 22: 2. Increase DOWN scale value by 20.
- Page 23 and 24: 1. The original position of AREA1 w
- Page 25 and 26: 5.8.9 RETURN It saves all settings
5.6 DNR (Dynamic Noise Reduction)<br />
Dynamic Noise Reduction in video images has the following effects.<br />
1. Images are brighter and sharper.<br />
2. When the level of noise is reduced, the performance of a camera can apparently be<br />
improved.<br />
3. When it is recorded digitally, reduced noise can reduce image file size.<br />
As the level of gain changes, the background noise in the low light level automatically<br />
decreases.<br />
1. Please direct the arrow to point to “DNR” on the SETUP menu by adjusting the switch to<br />
UP or DOWN direction.<br />
2. Select the mode you would like to operate by adjusting the switch to LEFT or RIGHT<br />
direction.<br />
OFF: No reduction in noise level.<br />
LOW: Little reduction in noise level with nearly no ghost image. Default value is<br />
LOW.<br />
MIDDLE: Just enough reduction in noise levels without causing much ghost<br />
imaging.<br />
HIGH: Huge reduction in noise level, which may cause much ghost imaging.<br />
5.7 SENS-UP<br />
SETUP<br />
LENS DC DNR LOW<br />
SENS-UP AUTO
Change language