FLEX Series Access Control Management Software - Everfocus

Delete Card(s)
EverAccess Flex software provides two ways to delete cardholders from the database:
delete one card a time, or delete all the cards in the database. The details of deleting
cards are introduced as below.
Delete a card
To delete a card, the steps are addressed as follows:
1. Select the cardholder in the list that will be removed from the database.
2. Click the delete button in the toolbar.
3. A confirmation dialog box will pop up as in Figure 8.22. Press “Yes” to delete
the cardholder. The card information will also be deleted from all controllers
containing this card. Press “No” to cancel the delete operation.
Figure 8.22 Confirmation of deletion dialog box
Delete All Cards
To remove all the cardholders from the database, follow the steps as below:
1. Click button in the toolbar.
2. A confirmation dialog box will prompt to enter the system administrator
password as in Figure 8.23.
3. Type in the correct password, and press “Yes” to delete personal profile data of
all cardholders in the system. All card data in controllers will be deleted at the
same time. Press “No” to cancel the delete operation. Caution must be
exercised because the deletion is irrecoverable.
74