FLEX Series Access Control Management Software - Everfocus

1. At the uneditable mode of card management dialog, select the desired
cardholder from the cardholder list.
2. Select the desired controller from the list. For example, in Fig. 8.18, controller
0001 is selected.
3. Click the edit button in the toolbar for card access attributes to bring up
the card access attribute dialog box as in Figure 8.19.
Figure 8.19 Card access attributes dialog box
4. Edit the access attributes in the dialog. The details of the operation are given in
the next subsection.
5. Click “OK” to .confirm the editing and close the dialog. The desired settings
will be transmitted to the controller and stored in database. Click “Cancel” to
discard the changes and exit.
6. Repeat steps 2 to 5 to set the card access attributes on all the controllers that the
card is applied to.
Card Access Attributes Dialog
Refer to the dialog sample in Fig. 8.19, basic information about the cardholder such as
Employee No., Card No. and Name are shown in the upper part of the dialog box.
These information are set when setting up the cardholder personal profile and cannot
be changed here.
70