FLEX Series Access Control Management Software - Everfocus

e. Repeat a, b, c and d to setup all the time zones and verification levels for
this date type.
3. Repeat 1 and 2 to set more door access rules for all the date types.
Tip: If two date types are about to have the same door access setting, the system
provides a shortcut setting scheme by using the “copy” and “paste” buttons.
Take date type II and type III as an example, whose door access setting are of the
same. Now we have type II done and type III intact. Here are the steps to use
“Copy” and “Paste” buttons:
a. Choosing “Type II” date type by clicking the button of “Type II”
b. Click the button “Copy” shown as 4 in Fig. 7.1
c. Choose the date type by clicking the button of “Type III”
d. Click “Paste”. Then the access authority of “Type III” will be set as the same
as the one of “Type II”.
By repeating the instructions from “select a controller” and “select a door”, the door
access setting for all the doors controlled by all other controllers can be accomplished in
the same way.
“Apply to days” Shortcut
If one or more days are to have the same authority settings, there is a short cut provided
in the software.
For example, say the user wants to take the access authority settings that have been
assigned to Monday, and apply them to other days of the week. The user should:
a. Choose “Monday” by clicking the button for “Monday”
b. Click the “Apply to days” shown in point 4 in Fig. 7.1. A new box will appear.
c. Click the box corresponding to the days to which the “Monday” settings are to
be applied.
d. Click on Apply to change the access times of the days.
52