FLEX Series Access Control Management Software - Everfocus
FLEX Series Access Control Management Software - Everfocus FLEX Series Access Control Management Software - Everfocus
Fig 6.2 Fig 6.3 47
Download the setting data to controllers Once finished configuring the access authority setting for the access groups, click the close button shown as 8 in Fig. 6.1. The dialogue box of “Download Data to Controller” will pop up, as shown in Fig. 6.4. Figure 6.4 The dialogue box for “Download Data To Controller” Follow the steps below to download the updated control data to the controllers. 1. Choose the controllers that need to be updated. Click on the controllers whose settings have been modified, from the “controller list”. The chosen one is highlighted. 2. Adding to the “target controller”. Click the “Add” button. The controller is then shown in the list of “target controller”. Repeat steps 1 and 2 until all the controllers that need to be updated are shown in the “target controller” list. Or the user can easily add all the online controllers to the “target list” by clicking the “All” button. 3. Select the databases. The boxes of databases needed for the door zone setting update are automatically checked already, i.e. control group setting and day I/O setting. If any other databases require update, please check the corresponding boxes. For details, please refer to the chapter of “Data Communication with Controllers”. 4. Download data to controller. By clicking the button of “Download Now” , a progress bar of data transmission appears on the screen. After the complement of the data transmission, a popup dialogue box, indicating the finish of the transmission, is shown on the screen. Close it and the dialogue of “Download Data to Controller” 5. Return to the main menu of system. Having finished the group setting and data download, the system will return to the main menu of monitoring. 48
- Page 3 and 4: Table of Contents CHAPTER 1 Introdu
- Page 5 and 6: Select a Controller................
- Page 7 and 8: Event Warning Message .............
- Page 9 and 10: About the software EverAccess Flex
- Page 11 and 12: • Free hard drive space: 100M byt
- Page 13 and 14: Fig. 2.2 If you wish to change the
- Page 15 and 16: Uninstall the program To uninstall
- Page 17 and 18: Authority Management Chapter 3 This
- Page 19 and 20: Manage Users and Authorities Click
- Page 21 and 22: Once the user is successfully added
- Page 23 and 24: Controller Configuration This chapt
- Page 25 and 26: Fig 4.3 Select the COM port for the
- Page 27 and 28: 2. Click the “Modify” button at
- Page 29 and 30: 5. Click “Ok” in the cell to ch
- Page 31 and 32: Fig. 4.15 Set the system reader pro
- Page 33 and 34: A System PIN Fail event will be gen
- Page 35 and 36: To disable a card, the user can des
- Page 37 and 38: setting is used to configure the ou
- Page 39 and 40: Fig. 4.21 Other setting tab Configu
- Page 41 and 42: Enable Auto Daylight Saving Time Th
- Page 43 and 44: Holiday Setting Chapter 5 This chap
- Page 45 and 46: Function button bar Add a Date To a
- Page 47 and 48: Edit a Date If a holiday needs to b
- Page 49 and 50: 3 1 2 Control Group Setting Dialog
- Page 51 and 52: Set Access Authority In this part w
- Page 53: c. Click the box corresponding to t
- Page 57 and 58: 1 3 2 Figure 7.1 Door Access Settin
- Page 59 and 60: e. Repeat a, b, c and d to setup al
- Page 61 and 62: Example Figure 7.2 An example: door
- Page 63 and 64: 2. Adding to the “target controll
- Page 65 and 66: 1 2 3 6 4 Figure 8.2 Cardholder man
- Page 67 and 68: Close button: press this button to
- Page 69 and 70: 5. Once all cards have been registe
- Page 71 and 72: 3. Press the button on card attribu
- Page 73 and 74: • Phone Number • Email • Posi
- Page 75 and 76: Filter Cardholders Figure 8.15: Car
- Page 77 and 78: 1. At the uneditable mode of card m
- Page 79 and 80: Finger_EN: reserved for fingerprint
- Page 81 and 82: Delete Card(s) EverAccess Flex soft
- Page 83 and 84: Export Cardholder Reports in HTML f
- Page 85 and 86: Figure 8.27 Department data edit wi
- Page 87 and 88: Fig. 9.2 The dialog of data downloa
- Page 89 and 90: 5. Click the “Download Now” box
- Page 91 and 92: 4. Select one or more controller fr
- Page 93 and 94: Fig. 10.2 The dialog of database ba
- Page 95 and 96: Fig. 10.5 The dialog of database re
- Page 97 and 98: • 1 Month: Delete all records old
- Page 99 and 100: Event Log This chapter covers all E
- Page 101 and 102: • Name: the name of the card hold
- Page 103 and 104: Fig. 11.8 Access granted event logs
Fig 6.2<br />
Fig 6.3<br />
47