FLEX Series Access Control Management Software - Everfocus

c. Click the box corresponding to the days to which the “Monday” settings are
to be applied.
d. Click “Apply” to change the access times of the days.
An Example Setup
Now we give an example to illustrate how to set up the access authority for access
groups: Assume controller 0001, which is in charge of the access of 8 doors altogether,
is installed in Company A’s access control system. The cards of all the employees are
divided into two groups: Group 1 and Group 2.
The cardholders of Group 1, all of whom are manager level employees, can access any
door at all times.
The cardholders of Group 2, who are general employees, can be
• “Entry/Exit” for Door 7 and 8 in the duration from 8:00 to 17:00 during the
weekdays;
• “Entry Only/No Exit” for Door 7 and 8 from 7:00 to 8:00 am;
• “No Entry/Exit Only” for Door 7 and 8 from 17:00 to 18:00;
• “Entry/Exit” for any other time.
According to the requests, the access authority of Group 1 is shown in Fig. 6.2 and that
of Group 2 is shown in Fig. 6.3
46