FLEX Series Access Control Management Software - Everfocus

3
1
2
Control Group Setting Dialog
In the main menu of the Flex Series Software, choose Management->Access group
setting, as shown in Fig. 5.1. Then click the “Control Group Setting” tab, as displayed in
Fig 6.1.
4
5
Fig. 6.1 The Control Group Settings tab
1. The controller list: A list of currently available controllers is given in the
dropdown box
2. The access group list: The index numbers for available groups (between 1 and
64)
3. The door zone list: This lists all doors managed by the controller selected in the
Controller List. Check or uncheck the boxes to add or remove the door from
the access group’s privileges.
4. Date Type Buttons: 10 date types are available including weekday, weekend and
holiday etc. Click each button to setup the access authority for each date type.
5. Time zone for door management: Used to setup the access permissions. There
are 10 bars for 10 date types. Only one time zone bar can be changed at a time.
Click the Date Type button to edit the Time Zone for that particular Date Type.
42
6
7