FLEX Series Access Control Management Software - Everfocus

Fig 4.3 Select the COM port for the new added controller
3. Click the “Search and submit” button to allow the software to search the
network for the controller with the given address on the given COM port. The
search result, (controller online/offline status) will be shown in the On/Off line
field. And the controller will be added to the controller list after the searching as
shown in the figure below:
Fig 4.4 The result of the new added controller
If you wish to add a controller that is not currently online, click “Submit” to add
the controller to the list directly without searching the network. The status of
the controller will be set as “offline” automatically.
Click “Cancel” to cancel the attempt to add a new controller.
Please note that the new added controller will be assigned the default location
description “Unknown”. Users can change it in the controller setting area. Please refer
to the section “Set door location” for more details.
Delete a Controller
To delete a controller, click the “Del” button in the function bar. A message box
will pop up to ask the user to confirm the deletion as shown below:
Fig. 4. 5 Delete controller prompt
18