FLEX Series Access Control Management Software - Everfocus

Manage Users and Authorities
Click “Management” in the menu, and then click “Authority Management”. The user
and authority management dialog box will pop up, shown as below:
Function
button bar
User property
area
User list
Fig. 3.1 Authority management dialog
The top part in the dialog is the function button bar. The middle area shows the
properties of the selected user for the purpose of editing. The bottom area presents the
whole user list. The small black triangle at left indicates the currently selected user.
The button “Top” , button “Bw” , button “Fw” 、button “BT” are
used to jump the first user record, the previous user record, the next user record and the
last user record, respectively. Alternatively, click on any user to designate it as the
currently selected one.
Adding a User
The basic steps to adding a user are explained below:
1. In the function bar, click the “Add” button . After clicking the “Add”
button, the user interface in the figure below will appear. At this time, only the
user property area responds to the user’s operation until the editing is finished.
2. Fill in the user name and the login name. These will be used when logging in to
the system.
12