FLEX Series Access Control Management Software - Everfocus
FLEX Series Access Control Management Software - Everfocus
FLEX Series Access Control Management Software - Everfocus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• Free hard drive space: 100M bytes free space<br />
• Screen resolution: 1024x768<br />
• An available serial port (in the event that the computer does not have a serial<br />
port, a third party USB-to-Serial converter cable may be used.)<br />
• An available USB port (1.1 or above)<br />
Basic Steps to Setup the System<br />
In this section, the basic steps to setup the system will be addressed. The related chapter<br />
in which detailed descriptions are outlined is given for reference.<br />
To setup a new system, follow the basic steps below. Note that the procedure does not<br />
have to be followed in the future when making system or maintenance changes.<br />
1. Install the software. (Chapter 2)<br />
2. Setup the users who will use the software and set the authority for these users.<br />
(Chapter 3)<br />
3. Add the controller(s) into the system. Based on the hardware installation and<br />
wiring, configure the door, reader(s) and alarm(s) in the controller(s). (Chapter 4)<br />
4. Build a plan of access rules:<br />
a. Setup the holiday and other date types. (Chapter 5)<br />
b. Setup the access groups and the access authority for each group.<br />
(Chapter 6)<br />
c. Setup the door access settings, such as unlock schedule, etc. (Chapter 7)<br />
5. Setup the cardholder database (Chapter 8):<br />
a. Enroll the cards<br />
b. Edit cardholders’ profiles<br />
c. Set card access attributes, such as access groups and so on.<br />
6. Make sure the hardware wiring is correct. Now the system is ready to go. Users<br />
can check the real-time event logs (Chapter 11) and remotely control the device<br />
like doors from the main interface. (Chapter 12).<br />
4