TB177 Oil Filter Installation.indd - Euroheat

Technical Specifi cation Bulletin Number
Fuel Type Date of Issue E d i t i o n
Oil
March 2004 1
Oil Filter Fitting and Oil Direction
TB177
Page Number
The oil fi lter must be fi tted onto the fuel line so that the direction of the oil
fl ow passing through the fi lter is as shown below.
The direction of the oil fl ow
The fi lter kit comes with brackets so that it may
be securely fi tted to a wall. Where the oil fi lter
mounting screw holes are facing a wall the small
bracket should be used.
See page 2 for details Diagram 2.
Where the oil fi lter mounting screw holes are
facing away from a wall the two brackets should
be used.
See page 2 for details Diagram 1.
Euroheat Distributors (HBS) Ltd., Unit 2, Court Farm Business Park, Bishops Frome, Worcestershire, WR6 5AY United Kingdom
Telephone Technical Support 01885 491117 Facsimile 01885 491101 Reception 01885 491100
Email tech@euroheat.co.uk Wed Site sales www.euroheat co.uk
Latest Technical Information www.euroheat.co.uk/support
1

Technical Specifi cation Bulletin Number
Fuel Type Date of Issue E d i t i o n
Oil
March 2004 1
Oil Filter Fitting and Oil Direction
Diag. 1 Diag. 2
Wall
Oil Filter Replacement
When replacing the oil fi lter, which should be done
annually, the new “O” rings supplied with the
replacement fi lter must be used.
Failure to do so can cause oil leaks and may allow air
into the oil line which can effect the function of the
oil control valve.
The fi lter must then be bled of air by fi rst loosening
the inlet bleed screw and then the outlet bleed
screw.
TB177
Wall
Filter bleed screws
CROSSLAND 489
Page Number
Euroheat Distributors (HBS) Ltd., Unit 2, Court Farm Business Park, Bishops Frome, Worcestershire, WR6 5AY United Kingdom
Telephone Technical Support 01885 491117 Facsimile 01885 491101 Reception 01885 491100
Email tech@euroheat.co.uk Wed Site sales www.euroheat co.uk
Latest Technical Information www.euroheat.co.uk/support
2