Rika Premio Instructions - Euroheat

ENGLISH
Ensure that when the stove is in ON mode the
heating operation starts after 10 seconds. In
automatic mode (TM) the heating process
starts in accordance with the programmed
heating times.
MAIN MENU – OPERATING RANGES
According to your requirements you can
choose one of the following three operating
types:
➧ Standby mode
SB
“SB” = Standby
Stove is switched off but remains
active for control by Tele-Control
(mobile).
➧ Manual operation
ON
70
“ON” = Manual operation
The number equals the heating
output in percent (0% is minimum
output and 100% is maximum
heating output).
➧ Automatic operation
TM
85
“TM” = Automatic operation
(Time mode)
The number equals the heating
output in percent (0% is minimum
output and 100% is maximum
heating output.
You can switch between the various operating
types by pressing “ENTER”
20
Start manual operation.
The following flashing indicators appear
alternately on the display
ST
21
“ST” indicates start
The number below indicates the remaining
time for the start process in minutes.
On completion of the start phase the following
appears continuously on the display
ON
70
ON
70
“ON” = Manual operation
If you want to change the current heating
output then you can set the required heating
output in 5% steps (from 0 to 100) by
pressing the “+” or “-” keys.