1/50 scale Papercraft Model Making the EC175 papercraft is simple ...

1/50 scale Papercraft Model
Making the EC175 papercraft is simple!
First print the model. Then cut, fold and glue it to have your very own EC175!
Average time required: 2 to 4 hours.

Help
Mountain Valley
Use A4 Sheets of paper
Size : 21*29.7mm)
Weight : 160 to 180 grs/M2
Avoid too thin, fragile,
and difficult to fold paper.
Ruler
To be used to cut straight
lines
Brush
To apply glue on the paper
Cutter or blade
Blade is prefered to make
precise cuts.
Stage 1
Cut the
parts
required in
the step..
8
Stage 2
Fold the
parts.
Check
mountain
and valley
foldings.
3+5
Apply glue on this area.
Cut this section.
Step number
Picture:
Final assemblies
are illustrated
Part numbers
In black: Single
parts
In red: Left parts
In green: Right
parts
White glue
Preferable because it
does not damage the
ink on the paper.
Paper knife or flat object
to fold the paper neatly
Tweezers to handle
small parts
Stage 3
Glue the
parts.
The step
is finished.
Felt tip pens to color
the thickness of paper
edges and the back of
the wheels and rotor.
Glue a weight such as a
wire, paperclip or a coin
on the front edge.

1
3
5
7
8
1
5
3+5
2+3
2+3
2
4
6
1+2
2+3
2+3+4

11
13
16
2+6
2+4+7
2+4+7
12
14
17
2+7
8 / 10
9
10
18
6
6
Glue a weight such
as a wire, paperclip
or a coin on the
front edge
15
2+7
8 / 10

19
23
27
3+7+14
18-19-20-21-22
31
32
8+9 / 10+11
24
23+24
20
24
28
4+8 / 4+10
15
17+18-19-20-21-22
21
25
29
6+12 / 6+13
5+15
1+17+23
22
26
30
14
5+15+16
1+17+23

3
To be printed on 21*29.7mm (A4) - 160 to 180 grs/m2 paper
12
13
7
15
16
4

18
19
20
21
22
17
23
14
To be printed on 21*29.7mm (A4) - 160 to 180 grs/m2 paper
24
5
6
2
9
8
10
11
1