NFRC Product Certification Authorization Report - ETO Doors
NFRC Product Certification Authorization Report - ETO Doors NFRC Product Certification Authorization Report - ETO Doors
NFRC PRODUCT CERTIFICATION AUTHORIZATION REPORT ________________________________________________________________________________________ ETO Doors' products have been certified by the National Fenestration Rating Council (NFRC). NFRC is the recognized leader in energy performance rating and certification programs for fenestration products. The NFRC is the only non-profit organization that administers uniform, independent rating and labeling systems for the energy performance of doors, windows, skylights etc. This NFRC report provides information on our doors' energy rating including a "U-Factor," "Solar Heat Gain Coefficient," "Visible Transmittance" and "Condensation Resistance." U-Factor U-factor is also known as thermal transmission. Here, it is used to measure the rate of heat loss through a door, therefore, the lower the Ufactor, the lower the amount of heat loss. In cold climates, where heating bills are a major concern, choosing doors with lower U-factors will reduce the amount of heat which escapes through a door from inside your house to the outside. U-Factor ratings generally fall between .20 and 1.20. Solar Heat Gain Coefficient (SHGC) The Solar Heat Gain Coefficient, also known as "SHGC", measures the rate of heat gain through a door. Therefore, the lower the SHGC, the lower the amount of solar heat gain. In hot climates, where air-conditioning bills are a major concern, choosing doors with lower SHGC will reduce the amount of heat that comes in through your doors from the outside. SHGC is expressed as a number between 0 and 1. Visible Transmittance Visible Transmittance (VT) measures how much light comes through a window. The higher the visible light transmittance, the more light is transmitted through the window. VT is expressed as a number between 0 and 1. Condensation Resistance Condensation Resistance (CR) measures the ability of a door to resist the formation of condensation on the interior door surface. The higher the rating, the better the product is at resisting condensation formation. CR is expressed as a number between 0 and 100. You can learn more about the NFRC Ratings at: http://www.NFRC.org ETO DOORS R&D TEAM
- Page 2 and 3: NFRC Product Certification Authoriz
- Page 4 and 5: NFRC Product Certification Authoriz
- Page 6 and 7: NFRC Product Certification Authoriz
- Page 8 and 9: NFRC Product Certification Authoriz
- Page 10 and 11: NFRC Product Certification Authoriz
- Page 12 and 13: NFRC Product Certification Authoriz
- Page 14 and 15: NFRC Product Certification Authoriz
- Page 16 and 17: NFRC Product Certification Authoriz
- Page 18 and 19: NFRC Product Certification Authoriz
- Page 20 and 21: NFRC Product Certification Authoriz
- Page 22 and 23: NFRC Product Certification Authoriz
- Page 24 and 25: NFRC Product Certification Authoriz
- Page 26 and 27: NFRC Product Certification Authoriz
- Page 28: Baseline Information Test Lab Test
<strong>NFRC</strong> PRODUCT CERTIFICATION AUTHORIZATION<br />
REPORT<br />
________________________________________________________________________________________<br />
<strong>ETO</strong> <strong>Doors</strong>' products have been certified by the National Fenestration Rating Council (<strong>NFRC</strong>). <strong>NFRC</strong> is the recognized leader in energy<br />
performance rating and certification programs for fenestration products. The <strong>NFRC</strong> is the only non-profit organization that administers<br />
uniform, independent rating and labeling systems for the energy performance of doors, windows, skylights etc.<br />
This <strong>NFRC</strong> report provides information on our doors' energy rating including a "U-Factor," "Solar Heat Gain Coefficient," "Visible<br />
Transmittance" and "Condensation Resistance."<br />
U-Factor<br />
U-factor is also known as thermal transmission. Here, it is used to measure the rate of heat loss through a door, therefore, the lower the Ufactor,<br />
the lower the amount of heat loss. In cold climates, where heating bills are a major concern, choosing doors with lower U-factors will<br />
reduce the amount of heat which escapes through a door from inside your house to the outside. U-Factor ratings generally fall between .20<br />
and 1.20.<br />
Solar Heat Gain Coefficient (SHGC)<br />
The Solar Heat Gain Coefficient, also known as "SHGC", measures the rate of heat gain through a door. Therefore, the lower the SHGC,<br />
the lower the amount of solar heat gain. In hot climates, where air-conditioning bills are a major concern, choosing doors with lower SHGC<br />
will reduce the amount of heat that comes in through your doors from the outside. SHGC is expressed as a number between 0 and 1.<br />
Visible Transmittance<br />
Visible Transmittance (VT) measures how much light comes through a window. The higher the visible light transmittance, the more light is<br />
transmitted through the window. VT is expressed as a number between 0 and 1.<br />
Condensation Resistance<br />
Condensation Resistance (CR) measures the ability of a door to resist the formation of condensation on the interior door surface. The higher<br />
the rating, the better the product is at resisting condensation formation. CR is expressed as a number between 0 and 100.<br />
You can learn more about the <strong>NFRC</strong> Ratings at: http://www.<strong>NFRC</strong>.org<br />
<strong>ETO</strong> DOORS R&D TEAM
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00001-00001 clr / air (1/4" gap) / clr - (DS/DS) WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.49 0.41 0.43 39<br />
00002-00001 clr / air (1/4" gap) / clr - (DS/DS) WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.51 0.30 0.31 39<br />
00003-00001 clr / air (1/4" gap) / clr - (5mm/5mm) WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.49 0.38 0.42 38<br />
00003-00002 clr / air (1/4" gap) / clr - (6mm/6mm) WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.49 0.38 0.42 38<br />
00004-00001 clr / air (1/4" gap) / clr - (5mm/5mm) WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.51 0.28 0.30 38<br />
00004-00002 clr / air (1/4" gap) / clr - (6mm/6mm) WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.51 0.28 0.30 38<br />
00005-00001 SB60 / air (1/4" gap) / clr - (DS/DS) WD/WD 2 0.035(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.22 0.39 46<br />
00005-00002 clr / air (1/4" gap) / SB60 - (DS/DS) WD/WD 2 0.035(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.25 0.39 46<br />
00006-00001 SB60 / air (1/4" gap) / clr - (DS/DS) WD/WD 2 0.035(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.17 0.27 46<br />
00006-00002 clr / air (1/4" gap) / SB60 - (DS/DS) WD/WD 2 0.035(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.19 0.27 46<br />
00007-00001 SB60 / air (1/4" gap) / clr - (5mm/5mm) WD/WD 2 0.035(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.22 0.38 45<br />
00007-00002 SB60 / air (1/4" gap) / clr - (6mm/6mm) WD/WD 2 0.035(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.22 0.38 45<br />
00007-00003 clr / air (1/4" gap) / SB60 - (5mm/5mm) WD/WD 2 0.035(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.25 0.38 45<br />
00007-00004 clr / air (1/4" gap) / SB60 - (6mm/6mm) WD/WD 2 0.035(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.25 0.38 45<br />
00008-00001 SB60 / air (1/4" gap) / clr - (5mm/5mm) WD/WD 2 0.035(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.16 0.27 45<br />
00008-00002 SB60 / air (1/4" gap) / clr - (6mm/6mm) WD/WD 2 0.035(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.16 0.27 45<br />
00008-00003 clr / air (1/4" gap) / SB60 - (5mm/5mm) WD/WD 2 0.035(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.18 0.27 45<br />
00008-00004 clr / air (1/4" gap) / SB60 - (6mm/6mm) WD/WD 2 0.035(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.18 0.27 45<br />
00009-00001 SB70 / air (1/4" gap) / clr - (DS/DS) WD/WD 2 0.018(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.16 0.34 46<br />
00009-00002 clr / air (1/4" gap) / SB70 - (DS/DS) WD/WD 2 0.018(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.20 0.34 46<br />
00010-00001 SB70 / air (1/4" gap) / clr - (DS/DS) WD/WD 2 0.018(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.12 0.24 46<br />
00010-00002 clr / air (1/4" gap) / SB70 - (DS/DS) WD/WD 2 0.018(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.15 0.24 46<br />
Page 1
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00011-00001 SB70 / air (1/4" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.16 0.34 45<br />
00011-00002 SB70 / air (1/4" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.16 0.34 45<br />
00011-00003 clr / air (1/4" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.21 0.34 45<br />
00011-00004 clr / air (1/4" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.21 0.34 45<br />
00012-00001 SB70 / air (1/4" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.12 0.24 45<br />
00012-00002 SB70 / air (1/4" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.12 0.24 45<br />
00012-00003 clr / air (1/4" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.15 0.24 45<br />
00012-00004 clr / air (1/4" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.15 0.24 45<br />
00013-00001 SG500 / air (1/4" gap) / clr - (DS/DS) WD/WD 2 0.215(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.44 0.36 0.40 44<br />
00013-00002 clr / air (1/4" gap) / SG500 - (DS/DS) WD/WD 2 0.215(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.44 0.38 0.40 44<br />
00014-00001 SG500 / air (1/4" gap) / clr - (DS/DS) WD/WD 2 0.215(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.47 0.26 0.29 44<br />
00014-00002 clr / air (1/4" gap) / SG500 - (DS/DS) WD/WD 2 0.215(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.47 0.28 0.29 44<br />
00015-00001 SG500 / air (1/4" gap) / clr - (5mm/5mm) WD/WD 2 0.215(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.44 0.34 0.39 43<br />
00015-00002 SG500 / air (1/4" gap) / clr - (6mm/6mm) WD/WD 2 0.215(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.44 0.34 0.39 43<br />
00015-00003 clr / air (1/4" gap) / SG500 - (5mm/5mm) WD/WD 2 0.215(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.44 0.36 0.39 43<br />
00015-00004 clr / air (1/4" gap) / SG500 - (6mm/6mm) WD/WD 2 0.215(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.44 0.36 0.39 43<br />
00016-00001 SG500 / air (1/4" gap) / clr - (5mm/5mm) WD/WD 2 0.215(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.47 0.25 0.28 43<br />
00016-00002 SG500 / air (1/4" gap) / clr - (6mm/6mm) WD/WD 2 0.215(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.47 0.25 0.28 43<br />
00016-00003 clr / air (1/4" gap) / SG500 - (5mm/5mm) WD/WD 2 0.215(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.47 0.26 0.28 43<br />
00016-00004 clr / air (1/4" gap) / SG500 - (6mm/6mm) WD/WD 2 0.215(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.47 0.26 0.28 43<br />
00017-00001 SN68 / air (1/4" gap) / clr - (DS/DS) WD/WD 2 0.039(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.22 0.37 46<br />
00017-00002 clr / air (1/4" gap) / SN68 - (DS/DS) WD/WD 2 0.039(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.26 0.37 46<br />
Page 2
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00018-00001 SN68 / air (1/4" gap) / clr - (DS/DS) WD/WD 2 0.039(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.16 0.26 46<br />
00018-00002 clr / air (1/4" gap) / SN68 - (DS/DS) WD/WD 2 0.039(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.19 0.26 46<br />
00019-00001 SN68 / air (1/4" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.22 0.36 45<br />
00019-00002 SN68 / air (1/4" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.22 0.36 45<br />
00019-00003 clr / air (1/4" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.25 0.36 45<br />
00019-00004 clr / air (1/4" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.250 A1-D Fill 1: AIR (100) N CL 0.42 0.25 0.36 45<br />
00020-00001 SN68 / air (1/4" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.16 0.26 45<br />
00020-00002 SN68 / air (1/4" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.16 0.26 45<br />
00020-00003 clr / air (1/4" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.19 0.26 45<br />
00020-00004 clr / air (1/4" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.19 0.26 45<br />
00021-00001 lami / air (1/4" gap) / clr - (5mm-090SGP<br />
-5mm/DS)<br />
00021-00002 clr / air (1/4" gap) / lami - (DS/5mm-<br />
090SGP-5mm)<br />
00022-00001 lami / air (1/4" gap) / clr - (5mm-090SGP<br />
-5mm/DS)<br />
00022-00002 clr / air (1/4" gap) / lami - (DS/5mm-<br />
090SGP-5mm)<br />
00023-00001 lami / air (1/4" gap) / clr - (5mm-090SGP<br />
-5mm/5mm)<br />
00023-00002 lami / air (1/4" gap) / clr - (5mm-090SGP<br />
-5mm/6mm)<br />
00023-00003 clr / air (1/4" gap) / lami - (5mm/5mm-<br />
090SGP-5mm)<br />
00023-00004 clr / air (1/4" gap) / lami - (6mm/5mm-<br />
090SGP-5mm)<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.34 0.41 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.38 0.41 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.25 0.29 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.27 0.29 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.33 0.41 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.33 0.41 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.36 0.41 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.36 0.41 40<br />
Page 3
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
00024-00001 lami / air (1/4" gap) / clr - (5mm-090SGP<br />
-5mm/5mm)<br />
00024-00002 lami / air (1/4" gap) / clr - (5mm-090SGP<br />
-5mm/6mm)<br />
00024-00003 clr / air (1/4" gap) / lami - (5mm/5mm-<br />
090SGP-5mm)<br />
00024-00004 clr / air (1/4" gap) / lami - (6mm/5mm-<br />
090SGP-5mm)<br />
00025-00001 lami / air (1/4" gap) / lami - (5mm-<br />
090SGP-5mm/5mm-090SGP-5mm)<br />
00026-00001 lami / air (1/4" gap) / lami - (5mm-<br />
090SGP-5mm/5mm-090SGP-5mm)<br />
00027-00001 lami / air (1/4" gap) / clr - (5mm-090PVB-<br />
5mm/DS)<br />
00027-00002 clr / air (1/4" gap) / lami - (DS/5mm-<br />
090PVB-5mm)<br />
00028-00001 lami / air (1/4" gap) / clr - (5mm-090PVB-<br />
5mm/DS)<br />
00028-00002 clr / air (1/4" gap) / lami - (DS/5mm-<br />
090PVB-5mm)<br />
00029-00001 lami / air (1/4" gap) / clr - (5mm-090PVB-<br />
5mm/5mm)<br />
00029-00002 lami / air (1/4" gap) / clr - (5mm-090PVB-<br />
5mm/6mm)<br />
00029-00003 clr / air (1/4" gap) / lami - (5mm/5mm-<br />
090PVB-5mm)<br />
00029-00004 clr / air (1/4" gap) / lami - (6mm/5mm-<br />
090PVB-5mm)<br />
00030-00001 lami / air (1/4" gap) / clr - (5mm-090PVB-<br />
5mm/5mm)<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.24 0.29 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.24 0.29 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.26 0.29 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.26 0.29 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.43 0.32 0.39 42<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.24 0.28 42<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.34 0.42 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.38 0.42 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.25 0.30 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.27 0.30 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.33 0.41 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.33 0.41 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.36 0.41 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.45 0.36 0.41 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.25 0.29 40<br />
Page 4
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
00030-00002 lami / air (1/4" gap) / clr - (5mm-090PVB-<br />
5mm/6mm)<br />
00030-00003 clr / air (1/4" gap) / lami - (5mm/5mm-<br />
090PVB-5mm)<br />
00030-00004 clr / air (1/4" gap) / lami - (6mm/5mm-<br />
090PVB-5mm)<br />
00031-00001 lami / air (1/4" gap) / lami - (5mm-<br />
090PVB-5mm/5mm-090PVB-5mm)<br />
00032-00001 lami / air (1/4" gap) / lami - (5mm-<br />
090PVB-5mm/5mm-090PVB-5mm)<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.25 0.29 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.26 0.29 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.26 0.29 40<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) N CL 0.43 0.32 0.41 42<br />
WD/WD 2 0.250 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.24 0.29 42<br />
00033-00001 clr / air (3/8" gap) / clr - (DS/DS) WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.47 0.41 0.43 41<br />
00034-00001 clr / air (3/8" gap) / clr - (DS/DS) WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.49 0.30 0.31 41<br />
00035-00001 clr / air (3/8" gap) / clr - (5mm/5mm) WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.47 0.38 0.42 41<br />
00035-00002 clr / air (3/8" gap) / clr - (6mm/6mm) WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.47 0.38 0.42 41<br />
00036-00001 clr / air (3/8" gap) / clr - (5mm/5mm) WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.49 0.28 0.30 41<br />
00036-00002 clr / air (3/8" gap) / clr - (6mm/6mm) WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.49 0.28 0.30 41<br />
00037-00001 SB60 / air (3/8" gap) / clr - (DS/DS) WD/WD 2 0.035(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.22 0.39 51<br />
00037-00002 clr / air (3/8" gap) / SB60 - (DS/DS) WD/WD 2 0.035(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.25 0.39 51<br />
00038-00001 SB60 / air (3/8" gap) / clr - (DS/DS) WD/WD 2 0.035(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.42 0.16 0.27 51<br />
00038-00002 clr / air (3/8" gap) / SB60 - (DS/DS) WD/WD 2 0.035(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.42 0.19 0.27 51<br />
00039-00001 SB60 / air (3/8" gap) / clr - (5mm/5mm) WD/WD 2 0.035(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.21 0.38 50<br />
00039-00002 SB60 / air (3/8" gap) / clr - (6mm/6mm) WD/WD 2 0.035(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.21 0.38 50<br />
00039-00003 clr / air (3/8" gap) / SB60 - (5mm/5mm) WD/WD 2 0.035(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.25 0.38 50<br />
00039-00004 clr / air (3/8" gap) / SB60 - (6mm/6mm) WD/WD 2 0.035(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.25 0.38 50<br />
00040-00001 SB60 / air (3/8" gap) / clr - (5mm/5mm) WD/WD 2 0.035(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.16 0.27 49<br />
Page 5
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00040-00002 SB60 / air (3/8" gap) / clr - (6mm/6mm) WD/WD 2 0.035(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.16 0.27 49<br />
00040-00003 clr / air (3/8" gap) / SB60 - (5mm/5mm) WD/WD 2 0.035(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.18 0.27 49<br />
00040-00004 clr / air (3/8" gap) / SB60 - (6mm/6mm) WD/WD 2 0.035(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.18 0.27 49<br />
00041-00001 SB70 / air (3/8" gap) / clr - (DS/DS) WD/WD 2 0.018(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.37 0.16 0.34 51<br />
00041-00002 clr / air (3/8" gap) / SB70 - (DS/DS) WD/WD 2 0.018(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.37 0.21 0.34 51<br />
00042-00001 SB70 / air (3/8" gap) / clr - (DS/DS) WD/WD 2 0.018(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.42 0.12 0.24 51<br />
00042-00002 clr / air (3/8" gap) / SB70 - (DS/DS) WD/WD 2 0.018(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.42 0.15 0.24 51<br />
00043-00001 SB70 / air (3/8" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.16 0.34 50<br />
00043-00002 SB70 / air (3/8" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.16 0.34 50<br />
00043-00003 clr / air (3/8" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.21 0.34 50<br />
00043-00004 clr / air (3/8" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.21 0.34 50<br />
00044-00001 SB70 / air (3/8" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.42 0.12 0.24 50<br />
00044-00002 SB70 / air (3/8" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.42 0.12 0.24 50<br />
00044-00003 clr / air (3/8" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.42 0.15 0.24 50<br />
00044-00004 clr / air (3/8" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.42 0.15 0.24 50<br />
00045-00001 SG500 / air (3/8" gap) / clr - (DS/DS) WD/WD 2 0.215(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.40 0.36 0.40 48<br />
00045-00002 clr / air (3/8" gap) / SG500 - (DS/DS) WD/WD 2 0.215(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.40 0.38 0.40 48<br />
00046-00001 SG500 / air (3/8" gap) / clr - (DS/DS) WD/WD 2 0.215(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.26 0.29 48<br />
00046-00002 clr / air (3/8" gap) / SG500 - (DS/DS) WD/WD 2 0.215(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.28 0.29 48<br />
00047-00001 SG500 / air (3/8" gap) / clr - (5mm/5mm) WD/WD 2 0.215(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.41 0.34 0.39 47<br />
00047-00002 SG500 / air (3/8" gap) / clr - (6mm/6mm) WD/WD 2 0.215(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.41 0.34 0.39 47<br />
00047-00003 clr / air (3/8" gap) / SG500 - (5mm/5mm) WD/WD 2 0.215(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.41 0.36 0.39 47<br />
Page 6
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00047-00004 clr / air (3/8" gap) / SG500 - (6mm/6mm) WD/WD 2 0.215(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.41 0.36 0.39 47<br />
00048-00001 SG500 / air (3/8" gap) / clr - (5mm/5mm) WD/WD 2 0.215(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.25 0.28 47<br />
00048-00002 SG500 / air (3/8" gap) / clr - (6mm/6mm) WD/WD 2 0.215(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.25 0.28 47<br />
00048-00003 clr / air (3/8" gap) / SG500 - (5mm/5mm) WD/WD 2 0.215(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.26 0.28 47<br />
00048-00004 clr / air (3/8" gap) / SG500 - (6mm/6mm) WD/WD 2 0.215(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.26 0.28 47<br />
00049-00001 SN68 / air (3/8" gap) / clr - (DS/DS) WD/WD 2 0.039(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.22 0.37 51<br />
00049-00002 clr / air (3/8" gap) / SN68 - (DS/DS) WD/WD 2 0.039(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.26 0.37 51<br />
00050-00001 SN68 / air (3/8" gap) / clr - (DS/DS) WD/WD 2 0.039(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.42 0.16 0.26 51<br />
00050-00002 clr / air (3/8" gap) / SN68 - (DS/DS) WD/WD 2 0.039(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.42 0.19 0.26 51<br />
00051-00001 SN68 / air (3/8" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.21 0.36 50<br />
00051-00002 SN68 / air (3/8" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.21 0.36 50<br />
00051-00003 clr / air (3/8" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.25 0.36 50<br />
00051-00004 clr / air (3/8" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.375 A1-D Fill 1: AIR (100) N CL 0.38 0.25 0.36 50<br />
00052-00001 SN68 / air (3/8" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.16 0.26 49<br />
00052-00002 SN68 / air (3/8" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.16 0.26 49<br />
00052-00003 clr / air (3/8" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.19 0.26 49<br />
00052-00004 clr / air (3/8" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.19 0.26 49<br />
00053-00001 lami / air (3/8" gap) / clr - (5mm-090SGP<br />
-5mm/DS)<br />
00053-00002 clr / air (3/8" gap) / lami - (DS/5mm-<br />
090SGP-5mm)<br />
00054-00001 lami / air (3/8" gap) / clr - (5mm-090SGP<br />
-5mm/DS)<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.43 0.34 0.41 43<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.43 0.38 0.41 43<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.25 0.29 43<br />
Page 7
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
00054-00002 clr / air (3/8" gap) / lami - (DS/5mm-<br />
090SGP-5mm)<br />
00055-00001 lami / air (3/8" gap) / clr - (5mm-090SGP<br />
-5mm/5mm)<br />
00055-00002 lami / air (3/8" gap) / clr - (5mm-090SGP<br />
-5mm/6mm)<br />
00055-00003 clr / air (3/8" gap) / lami - (5mm/5mm-<br />
090SGP-5mm)<br />
00055-00004 clr / air (3/8" gap) / lami - (6mm/5mm-<br />
090SGP-5mm)<br />
00056-00001 lami / air (3/8" gap) / clr - (5mm-090SGP<br />
-5mm/5mm)<br />
00056-00002 lami / air (3/8" gap) / clr - (5mm-090SGP<br />
-5mm/6mm)<br />
00056-00003 clr / air (3/8" gap) / lami - (5mm/5mm-<br />
090SGP-5mm)<br />
00056-00004 clr / air (3/8" gap) / lami - (6mm/5mm-<br />
090SGP-5mm)<br />
00057-00001 lami / air (3/8" gap) / lami - (5mm-<br />
090SGP-5mm/5mm-090SGP-5mm)<br />
00058-00001 lami / air (3/8" gap) / lami - (5mm-<br />
090SGP-5mm/5mm-090SGP-5mm)<br />
00059-00001 lami / air (3/8" gap) / clr - (5mm-090PVB-<br />
5mm/DS)<br />
00059-00002 clr / air (3/8" gap) / lami - (DS/5mm-<br />
090PVB-5mm)<br />
00060-00001 lami / air (3/8" gap) / clr - (5mm-090PVB-<br />
5mm/DS)<br />
00060-00002 clr / air (3/8" gap) / lami - (DS/5mm-<br />
090PVB-5mm)<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.28 0.29 43<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.24 0.29 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.24 0.29 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.26 0.29 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.26 0.29 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.41 0.32 0.39 45<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.24 0.28 45<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.43 0.34 0.42 43<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.43 0.38 0.42 43<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.25 0.30 43<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.28 0.30 43<br />
Page 8
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
00061-00001 lami / air (3/8" gap) / clr - (5mm-090PVB-<br />
5mm/5mm)<br />
00061-00002 lami / air (3/8" gap) / clr - (5mm-090PVB-<br />
5mm/6mm)<br />
00061-00003 clr / air (3/8" gap) / lami - (5mm/5mm-<br />
090PVB-5mm)<br />
00061-00004 clr / air (3/8" gap) / lami - (6mm/5mm-<br />
090PVB-5mm)<br />
00062-00001 lami / air (3/8" gap) / clr - (5mm-090PVB-<br />
5mm/5mm)<br />
00062-00002 lami / air (3/8" gap) / clr - (5mm-090PVB-<br />
5mm/6mm)<br />
00062-00003 clr / air (3/8" gap) / lami - (5mm/5mm-<br />
090PVB-5mm)<br />
00062-00004 clr / air (3/8" gap) / lami - (6mm/5mm-<br />
090PVB-5mm)<br />
00063-00001 lami / air (3/8" gap) / lami - (5mm-<br />
090PVB-5mm/5mm-090PVB-5mm)<br />
00064-00001 lami / air (3/8" gap) / lami - (5mm-<br />
090PVB-5mm/5mm-090PVB-5mm)<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.43 0.33 0.41 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.43 0.33 0.41 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.43 0.36 0.41 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.43 0.36 0.41 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.24 0.29 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.24 0.29 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.26 0.29 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.26 0.29 42<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) N CL 0.41 0.32 0.41 45<br />
WD/WD 2 0.375 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.24 0.29 45<br />
00065-00001 clr / air (1/2" gap) / clr - (DS/DS) WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.46 0.41 0.43 43<br />
00066-00001 clr / air (1/2" gap) / clr - (DS/DS) WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.48 0.30 0.31 42<br />
00067-00001 clr / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.43 0.38 0.42 41<br />
00067-00002 clr / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.43 0.38 0.42 41<br />
00068-00001 clr / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.28 0.30 41<br />
00068-00002 clr / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.28 0.30 41<br />
00069-00001 SB60 / air (1/2" gap) / clr - (DS/DS) WD/WD 2 0.035(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.36 0.22 0.39 53<br />
00069-00002 clr / air (1/2" gap) / SB60 - (DS/DS) WD/WD 2 0.035(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.36 0.26 0.39 53<br />
Page 9
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00070-00001 SB60 / air (1/2" gap) / clr - (DS/DS) WD/WD 2 0.035(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.16 0.27 51<br />
00070-00002 clr / air (1/2" gap) / SB60 - (DS/DS) WD/WD 2 0.035(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.19 0.27 51<br />
00071-00001 SB60 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.035(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.38 50<br />
00071-00002 SB60 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.035(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.38 50<br />
00071-00003 clr / air (1/2" gap) / SB60 - (5mm/5mm) WD/WD 2 0.035(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.34 0.25 0.38 50<br />
00071-00004 clr / air (1/2" gap) / SB60 - (6mm/6mm) WD/WD 2 0.035(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.34 0.25 0.38 50<br />
00072-00001 SB60 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.035(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.16 0.27 50<br />
00072-00002 SB60 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.035(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.16 0.27 50<br />
00072-00003 clr / air (1/2" gap) / SB60 - (5mm/5mm) WD/WD 2 0.035(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.18 0.27 50<br />
00072-00004 clr / air (1/2" gap) / SB60 - (6mm/6mm) WD/WD 2 0.035(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.18 0.27 50<br />
00073-00001 SB70 / air (1/2" gap) / clr - (DS/DS) WD/WD 2 0.018(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.36 0.16 0.34 54<br />
00073-00002 clr / air (1/2" gap) / SB70 - (DS/DS) WD/WD 2 0.018(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.36 0.21 0.34 54<br />
00074-00001 SB70 / air (1/2" gap) / clr - (DS/DS) WD/WD 2 0.018(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.12 0.24 51<br />
00074-00002 clr / air (1/2" gap) / SB70 - (DS/DS) WD/WD 2 0.018(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.16 0.24 51<br />
00075-00001 SB70 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.33 0.16 0.34 50<br />
00075-00002 SB70 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.33 0.16 0.34 50<br />
00075-00003 clr / air (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.33 0.21 0.34 50<br />
00075-00004 clr / air (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.33 0.21 0.34 50<br />
00076-00001 SB70 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.12 0.24 50<br />
00076-00002 SB70 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.12 0.24 50<br />
00076-00003 clr / air (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.15 0.24 50<br />
00076-00004 clr / air (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.15 0.24 50<br />
Page 10
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00077-00001 SG500 / air (1/2" gap) / clr - (DS/DS) WD/WD 2 0.215(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.39 0.36 0.40 50<br />
00077-00002 clr / air (1/2" gap) / SG500 - (DS/DS) WD/WD 2 0.215(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.39 0.39 0.40 50<br />
00078-00001 SG500 / air (1/2" gap) / clr - (DS/DS) WD/WD 2 0.215(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.26 0.29 49<br />
00078-00002 clr / air (1/2" gap) / SG500 - (DS/DS) WD/WD 2 0.215(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.28 0.29 49<br />
00079-00001 SG500 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.215(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.36 0.34 0.39 47<br />
00079-00002 SG500 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.215(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.36 0.34 0.39 47<br />
00079-00003 clr / air (1/2" gap) / SG500 - (5mm/5mm) WD/WD 2 0.215(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.36 0.36 0.39 47<br />
00079-00004 clr / air (1/2" gap) / SG500 - (6mm/6mm) WD/WD 2 0.215(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.36 0.36 0.39 47<br />
00080-00001 SG500 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.215(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.40 0.25 0.28 47<br />
00080-00002 SG500 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.215(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.40 0.25 0.28 47<br />
00080-00003 clr / air (1/2" gap) / SG500 - (5mm/5mm) WD/WD 2 0.215(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.40 0.26 0.28 47<br />
00080-00004 clr / air (1/2" gap) / SG500 - (6mm/6mm) WD/WD 2 0.215(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.40 0.26 0.28 47<br />
00081-00001 SN68 / air (1/2" gap) / clr - (DS/DS) WD/WD 2 0.039(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.36 0.21 0.37 53<br />
00081-00002 clr / air (1/2" gap) / SN68 - (DS/DS) WD/WD 2 0.039(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.36 0.26 0.37 53<br />
00082-00001 SN68 / air (1/2" gap) / clr - (DS/DS) WD/WD 2 0.039(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.16 0.26 51<br />
00082-00002 clr / air (1/2" gap) / SN68 - (DS/DS) WD/WD 2 0.039(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.19 0.26 51<br />
00083-00001 SN68 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.36 50<br />
00083-00002 SN68 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.36 50<br />
00083-00003 clr / air (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.34 0.25 0.36 50<br />
00083-00004 clr / air (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 A1-D Fill 1: AIR (100) N CL 0.34 0.25 0.36 50<br />
00084-00001 SN68 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.16 0.26 50<br />
00084-00002 SN68 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.16 0.26 50<br />
Page 11
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00084-00003 clr / air (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.19 0.26 50<br />
00084-00004 clr / air (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.19 0.26 50<br />
00085-00001 lami / air (1/2" gap) / clr - (5mm-090SGP<br />
-5mm/DS)<br />
00085-00002 clr / air (1/2" gap) / lami - (DS/5mm-<br />
090SGP-5mm)<br />
00086-00001 lami / air (1/2" gap) / clr - (5mm-090SGP<br />
-5mm/DS)<br />
00086-00002 clr / air (1/2" gap) / lami - (DS/5mm-<br />
090SGP-5mm)<br />
00087-00001 lami / air (1/2" gap) / clr - (5mm-090SGP<br />
-5mm/5mm)<br />
00087-00002 lami / air (1/2" gap) / clr - (5mm-090SGP<br />
-5mm/6mm)<br />
00087-00003 clr / air (1/2" gap) / lami - (5mm/5mm-<br />
090SGP-5mm)<br />
00087-00004 clr / air (1/2" gap) / lami - (6mm/5mm-<br />
090SGP-5mm)<br />
00088-00001 lami / air (1/2" gap) / clr - (5mm-090SGP<br />
-5mm/5mm)<br />
00088-00002 lami / air (1/2" gap) / clr - (5mm-090SGP<br />
-5mm/6mm)<br />
00088-00003 clr / air (1/2" gap) / lami - (5mm/5mm-<br />
090SGP-5mm)<br />
00088-00004 clr / air (1/2" gap) / lami - (6mm/5mm-<br />
090SGP-5mm)<br />
00089-00001 lami / air (1/2" gap) / lami - (5mm-<br />
090SGP-5mm/5mm-090SGP-5mm)<br />
00090-00001 lami / air (1/2" gap) / lami - (5mm-<br />
090SGP-5mm/5mm-090SGP-5mm)<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.34 0.41 44<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.38 0.41 44<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.25 0.29 44<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.28 0.29 44<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.24 0.29 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.24 0.29 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.26 0.29 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.26 0.29 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.41 0.32 0.39 46<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.24 0.28 46<br />
Page 12
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
00091-00001 lami / air (1/2" gap) / clr - (5mm-090PVB-<br />
5mm/DS)<br />
00091-00002 clr / air (1/2" gap) / lami - (DS/5mm-<br />
090PVB-5mm)<br />
00092-00001 lami / air (1/2" gap) / clr - (5mm-090PVB-<br />
5mm/DS)<br />
00092-00002 clr / air (1/2" gap) / lami - (DS/5mm-<br />
090PVB-5mm)<br />
00093-00001 lami / air (1/2" gap) / clr - (5mm-090PVB-<br />
5mm/5mm)<br />
00093-00002 lami / air (1/2" gap) / clr - (5mm-090PVB-<br />
5mm/6mm)<br />
00093-00003 clr / air (1/2" gap) / lami - (5mm/5mm-<br />
090PVB-5mm)<br />
00093-00004 clr / air (1/2" gap) / lami - (6mm/5mm-<br />
090PVB-5mm)<br />
00094-00001 lami / air (1/2" gap) / clr - (5mm-090PVB-<br />
5mm/5mm)<br />
00094-00002 lami / air (1/2" gap) / clr - (5mm-090PVB-<br />
5mm/6mm)<br />
00094-00003 clr / air (1/2" gap) / lami - (5mm/5mm-<br />
090PVB-5mm)<br />
00094-00004 clr / air (1/2" gap) / lami - (6mm/5mm-<br />
090PVB-5mm)<br />
00095-00001 lami / air (1/2" gap) / lami - (5mm-<br />
090PVB-5mm/5mm-090PVB-5mm)<br />
00096-00001 lami / air (1/2" gap) / lami - (5mm-<br />
090PVB-5mm/5mm-090PVB-5mm)<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.34 0.42 44<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.38 0.42 44<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.25 0.30 44<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.28 0.30 44<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.24 0.29 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.24 0.29 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.27 0.29 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.27 0.29 43<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) N CL 0.41 0.32 0.41 46<br />
WD/WD 2 0.500 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.24 0.29 46<br />
00097-00001 clr / air (5/8" gap) / clr - (DS/DS) WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.43 0.41 0.43 41<br />
00098-00001 clr / air (5/8" gap) / clr - (DS/DS) WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.30 0.31 41<br />
Page 13
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00099-00001 clr / air (5/8" gap) / clr - (5mm/5mm) WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.43 0.38 0.42 41<br />
00099-00002 clr / air (5/8" gap) / clr - (6mm/6mm) WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.43 0.38 0.42 41<br />
00100-00001 clr / air (5/8" gap) / clr - (5mm/5mm) WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.28 0.30 41<br />
00100-00002 clr / air (5/8" gap) / clr - (6mm/6mm) WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.28 0.30 41<br />
00101-00001 SB60 / air (5/8" gap) / clr - (DS/DS) WD/WD 2 0.035(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.22 0.39 51<br />
00101-00002 clr / air (5/8" gap) / SB60 - (DS/DS) WD/WD 2 0.035(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.26 0.39 51<br />
00102-00001 SB60 / air (5/8" gap) / clr - (DS/DS) WD/WD 2 0.035(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.16 0.27 51<br />
00102-00002 clr / air (5/8" gap) / SB60 - (DS/DS) WD/WD 2 0.035(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.19 0.27 51<br />
00103-00001 SB60 / air (5/8" gap) / clr - (5mm/5mm) WD/WD 2 0.035(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.38 50<br />
00103-00002 SB60 / air (5/8" gap) / clr - (6mm/6mm) WD/WD 2 0.035(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.38 50<br />
00103-00003 clr / air (5/8" gap) / SB60 - (5mm/5mm) WD/WD 2 0.035(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.25 0.38 50<br />
00103-00004 clr / air (5/8" gap) / SB60 - (6mm/6mm) WD/WD 2 0.035(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.25 0.38 50<br />
00104-00001 SB60 / air (5/8" gap) / clr - (5mm/5mm) WD/WD 2 0.035(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.27 50<br />
00104-00002 SB60 / air (5/8" gap) / clr - (6mm/6mm) WD/WD 2 0.035(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.27 50<br />
00104-00003 clr / air (5/8" gap) / SB60 - (5mm/5mm) WD/WD 2 0.035(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.18 0.27 50<br />
00104-00004 clr / air (5/8" gap) / SB60 - (6mm/6mm) WD/WD 2 0.035(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.18 0.27 50<br />
00105-00001 SB70 / air (5/8" gap) / clr - (DS/DS) WD/WD 2 0.018(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.16 0.34 52<br />
00105-00002 clr / air (5/8" gap) / SB70 - (DS/DS) WD/WD 2 0.018(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.34 52<br />
00106-00001 SB70 / air (5/8" gap) / clr - (DS/DS) WD/WD 2 0.018(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.12 0.24 52<br />
00106-00002 clr / air (5/8" gap) / SB70 - (DS/DS) WD/WD 2 0.018(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.16 0.24 52<br />
00107-00001 SB70 / air (5/8" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.15 0.34 50<br />
00107-00002 SB70 / air (5/8" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.15 0.34 50<br />
Page 14
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00107-00003 clr / air (5/8" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.34 50<br />
00107-00004 clr / air (5/8" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.34 50<br />
00108-00001 SB70 / air (5/8" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.12 0.24 50<br />
00108-00002 SB70 / air (5/8" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.12 0.24 50<br />
00108-00003 clr / air (5/8" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.24 50<br />
00108-00004 clr / air (5/8" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.24 50<br />
00109-00001 SG500 / air (5/8" gap) / clr - (DS/DS) WD/WD 2 0.215(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.37 0.36 0.40 48<br />
00109-00002 clr / air (5/8" gap) / SG500 - (DS/DS) WD/WD 2 0.215(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.37 0.39 0.40 48<br />
00110-00001 SG500 / air (5/8" gap) / clr - (DS/DS) WD/WD 2 0.215(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.40 0.26 0.29 48<br />
00110-00002 clr / air (5/8" gap) / SG500 - (DS/DS) WD/WD 2 0.215(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.40 0.28 0.29 48<br />
00111-00001 SG500 / air (5/8" gap) / clr - (5mm/5mm) WD/WD 2 0.215(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.37 0.34 0.39 47<br />
00111-00002 SG500 / air (5/8" gap) / clr - (6mm/6mm) WD/WD 2 0.215(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.37 0.34 0.39 47<br />
00111-00003 clr / air (5/8" gap) / SG500 - (5mm/5mm) WD/WD 2 0.215(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.37 0.36 0.39 47<br />
00111-00004 clr / air (5/8" gap) / SG500 - (6mm/6mm) WD/WD 2 0.215(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.37 0.36 0.39 47<br />
00112-00001 SG500 / air (5/8" gap) / clr - (5mm/5mm) WD/WD 2 0.215(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.25 0.28 47<br />
00112-00002 SG500 / air (5/8" gap) / clr - (6mm/6mm) WD/WD 2 0.215(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.25 0.28 47<br />
00112-00003 clr / air (5/8" gap) / SG500 - (5mm/5mm) WD/WD 2 0.215(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.26 0.28 47<br />
00112-00004 clr / air (5/8" gap) / SG500 - (6mm/6mm) WD/WD 2 0.215(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.26 0.28 47<br />
00113-00001 SN68 / air (5/8" gap) / clr - (DS/DS) WD/WD 2 0.039(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.37 51<br />
00113-00002 clr / air (5/8" gap) / SN68 - (DS/DS) WD/WD 2 0.039(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.26 0.37 51<br />
00114-00001 SN68 / air (5/8" gap) / clr - (DS/DS) WD/WD 2 0.039(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.16 0.26 51<br />
00114-00002 clr / air (5/8" gap) / SN68 - (DS/DS) WD/WD 2 0.039(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.38 0.19 0.26 51<br />
Page 15
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00115-00001 SN68 / air (5/8" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.36 50<br />
00115-00002 SN68 / air (5/8" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.36 50<br />
00115-00003 clr / air (5/8" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.26 0.36 50<br />
00115-00004 clr / air (5/8" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.625 A1-D Fill 1: AIR (100) N CL 0.34 0.26 0.36 50<br />
00116-00001 SN68 / air (5/8" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.26 50<br />
00116-00002 SN68 / air (5/8" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.26 50<br />
00116-00003 clr / air (5/8" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.19 0.26 50<br />
00116-00004 clr / air (5/8" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.19 0.26 50<br />
00117-00001 lami / air (5/8" gap) / clr - (5mm-090SGP<br />
-5mm/DS)<br />
00117-00002 clr / air (5/8" gap) / lami - (DS/5mm-<br />
090SGP-5mm)<br />
00118-00001 lami / air (5/8" gap) / clr - (5mm-090SGP<br />
-5mm/DS)<br />
00118-00002 clr / air (5/8" gap) / lami - (DS/5mm-<br />
090SGP-5mm)<br />
00119-00001 lami / air (5/8" gap) / clr - (5mm-090SGP<br />
-5mm/5mm)<br />
00119-00002 lami / air (5/8" gap) / clr - (5mm-090SGP<br />
-5mm/6mm)<br />
00119-00003 clr / air (5/8" gap) / lami - (5mm/5mm-<br />
090SGP-5mm)<br />
00119-00004 clr / air (5/8" gap) / lami - (6mm/5mm-<br />
090SGP-5mm)<br />
00120-00001 lami / air (5/8" gap) / clr - (5mm-090SGP<br />
-5mm/5mm)<br />
00120-00002 lami / air (5/8" gap) / clr - (5mm-090SGP<br />
-5mm/6mm)<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.34 0.41 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.38 0.41 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.25 0.29 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.28 0.29 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.24 0.29 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.24 0.29 44<br />
Page 16
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
00120-00003 clr / air (5/8" gap) / lami - (5mm/5mm-<br />
090SGP-5mm)<br />
00120-00004 clr / air (5/8" gap) / lami - (6mm/5mm-<br />
090SGP-5mm)<br />
00121-00001 lami / air (5/8" gap) / lami - (5mm-<br />
090SGP-5mm/5mm-090SGP-5mm)<br />
00122-00001 lami / air (5/8" gap) / lami - (5mm-<br />
090SGP-5mm/5mm-090SGP-5mm)<br />
00123-00001 lami / air (5/8" gap) / clr - (5mm-090PVB-<br />
5mm/DS)<br />
00123-00002 clr / air (5/8" gap) / lami - (DS/5mm-<br />
090PVB-5mm)<br />
00124-00001 lami / air (5/8" gap) / clr - (5mm-090PVB-<br />
5mm/DS)<br />
00124-00002 clr / air (5/8" gap) / lami - (DS/5mm-<br />
090PVB-5mm)<br />
00125-00001 lami / air (5/8" gap) / clr - (5mm-090PVB-<br />
5mm/5mm)<br />
00125-00002 lami / air (5/8" gap) / clr - (5mm-090PVB-<br />
5mm/6mm)<br />
00125-00003 clr / air (5/8" gap) / lami - (5mm/5mm-<br />
090PVB-5mm)<br />
00125-00004 clr / air (5/8" gap) / lami - (6mm/5mm-<br />
090PVB-5mm)<br />
00126-00001 lami / air (5/8" gap) / clr - (5mm-090PVB-<br />
5mm/5mm)<br />
00126-00002 lami / air (5/8" gap) / clr - (5mm-090PVB-<br />
5mm/6mm)<br />
00126-00003 clr / air (5/8" gap) / lami - (5mm/5mm-<br />
090PVB-5mm)<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.27 0.29 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.27 0.29 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.41 0.32 0.39 46<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.24 0.28 46<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.34 0.42 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.38 0.42 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.25 0.30 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.28 0.30 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.24 0.29 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.24 0.29 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.27 0.29 44<br />
Page 17
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
00126-00004 clr / air (5/8" gap) / lami - (6mm/5mm-<br />
090PVB-5mm)<br />
00127-00001 lami / air (5/8" gap) / lami - (5mm-<br />
090PVB-5mm/5mm-090PVB-5mm)<br />
00128-00001 lami / air (5/8" gap) / lami - (5mm-<br />
090PVB-5mm/5mm-090PVB-5mm)<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.44 0.27 0.29 44<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) N CL 0.41 0.32 0.41 46<br />
WD/WD 2 0.625 A1-D Fill 1: AIR (100) T 1.50 CL 0.43 0.24 0.29 46<br />
00129-00001 clr / air (3/4" gap) / clr - (DS/DS) WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.43 0.41 0.43 42<br />
00130-00001 clr / air (3/4" gap) / clr - (DS/DS) WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.30 0.31 42<br />
00131-00001 clr / air (3/4" gap) / clr - (5mm/5mm) WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.43 0.38 0.42 41<br />
00131-00002 clr / air (3/4" gap) / clr - (6mm/6mm) WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.43 0.38 0.42 41<br />
00132-00001 clr / air (3/4" gap) / clr - (5mm/5mm) WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.28 0.30 41<br />
00132-00002 clr / air (3/4" gap) / clr - (6mm/6mm) WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.46 0.28 0.30 41<br />
00133-00001 SB60 / air (3/4" gap) / clr - (DS/DS) WD/WD 2 0.035(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.22 0.39 51<br />
00133-00002 clr / air (3/4" gap) / SB60 - (DS/DS) WD/WD 2 0.035(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.26 0.39 51<br />
00134-00001 SB60 / air (3/4" gap) / clr - (DS/DS) WD/WD 2 0.035(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.27 51<br />
00134-00002 clr / air (3/4" gap) / SB60 - (DS/DS) WD/WD 2 0.035(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.19 0.27 51<br />
00135-00001 SB60 / air (3/4" gap) / clr - (5mm/5mm) WD/WD 2 0.035(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.21 0.38 50<br />
00135-00002 SB60 / air (3/4" gap) / clr - (6mm/6mm) WD/WD 2 0.035(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.21 0.38 50<br />
00135-00003 clr / air (3/4" gap) / SB60 - (5mm/5mm) WD/WD 2 0.035(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.25 0.38 50<br />
00135-00004 clr / air (3/4" gap) / SB60 - (6mm/6mm) WD/WD 2 0.035(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.25 0.38 50<br />
00136-00001 SB60 / air (3/4" gap) / clr - (5mm/5mm) WD/WD 2 0.035(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.27 50<br />
00136-00002 SB60 / air (3/4" gap) / clr - (6mm/6mm) WD/WD 2 0.035(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.27 50<br />
00136-00003 clr / air (3/4" gap) / SB60 - (5mm/5mm) WD/WD 2 0.035(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.19 0.27 50<br />
00136-00004 clr / air (3/4" gap) / SB60 - (6mm/6mm) WD/WD 2 0.035(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.19 0.27 50<br />
Page 18
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00137-00001 SB70 / air (3/4" gap) / clr - (DS/DS) WD/WD 2 0.018(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.34 0.15 0.34 52<br />
00137-00002 clr / air (3/4" gap) / SB70 - (DS/DS) WD/WD 2 0.018(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.34 52<br />
00138-00001 SB70 / air (3/4" gap) / clr - (DS/DS) WD/WD 2 0.018(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.12 0.24 52<br />
00138-00002 clr / air (3/4" gap) / SB70 - (DS/DS) WD/WD 2 0.018(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.24 52<br />
00139-00001 SB70 / air (3/4" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.34 0.15 0.34 50<br />
00139-00002 SB70 / air (3/4" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.34 0.15 0.34 50<br />
00139-00003 clr / air (3/4" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.34 50<br />
00139-00004 clr / air (3/4" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.34 0.21 0.34 50<br />
00140-00001 SB70 / air (3/4" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.12 0.24 50<br />
00140-00002 SB70 / air (3/4" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.12 0.24 50<br />
00140-00003 clr / air (3/4" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.24 50<br />
00140-00004 clr / air (3/4" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.24 50<br />
00141-00001 SG500 / air (3/4" gap) / clr - (DS/DS) WD/WD 2 0.215(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.37 0.36 0.40 48<br />
00141-00002 clr / air (3/4" gap) / SG500 - (DS/DS) WD/WD 2 0.215(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.37 0.39 0.40 48<br />
00142-00001 SG500 / air (3/4" gap) / clr - (DS/DS) WD/WD 2 0.215(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.26 0.29 48<br />
00142-00002 clr / air (3/4" gap) / SG500 - (DS/DS) WD/WD 2 0.215(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.28 0.29 48<br />
00143-00001 SG500 / air (3/4" gap) / clr - (5mm/5mm) WD/WD 2 0.215(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.37 0.34 0.39 47<br />
00143-00002 SG500 / air (3/4" gap) / clr - (6mm/6mm) WD/WD 2 0.215(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.37 0.34 0.39 47<br />
00143-00003 clr / air (3/4" gap) / SG500 - (5mm/5mm) WD/WD 2 0.215(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.37 0.36 0.39 47<br />
00143-00004 clr / air (3/4" gap) / SG500 - (6mm/6mm) WD/WD 2 0.215(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.37 0.36 0.39 47<br />
00144-00001 SG500 / air (3/4" gap) / clr - (5mm/5mm) WD/WD 2 0.215(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.25 0.28 47<br />
00144-00002 SG500 / air (3/4" gap) / clr - (6mm/6mm) WD/WD 2 0.215(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.25 0.28 47<br />
Page 19
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00144-00003 clr / air (3/4" gap) / SG500 - (5mm/5mm) WD/WD 2 0.215(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.26 0.28 47<br />
00144-00004 clr / air (3/4" gap) / SG500 - (6mm/6mm) WD/WD 2 0.215(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.41 0.26 0.28 47<br />
00145-00001 SN68 / air (3/4" gap) / clr - (DS/DS) WD/WD 2 0.039(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.21 0.37 51<br />
00145-00002 clr / air (3/4" gap) / SN68 - (DS/DS) WD/WD 2 0.039(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.26 0.37 51<br />
00146-00001 SN68 / air (3/4" gap) / clr - (DS/DS) WD/WD 2 0.039(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.26 51<br />
00146-00002 clr / air (3/4" gap) / SN68 - (DS/DS) WD/WD 2 0.039(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.19 0.26 51<br />
00147-00001 SN68 / air (3/4" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.21 0.36 50<br />
00147-00002 SN68 / air (3/4" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.21 0.36 50<br />
00147-00003 clr / air (3/4" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.26 0.36 50<br />
00147-00004 clr / air (3/4" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.750 A1-D Fill 1: AIR (100) N CL 0.35 0.26 0.36 50<br />
00148-00001 SN68 / air (3/4" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.26 50<br />
00148-00002 SN68 / air (3/4" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.16 0.26 50<br />
00148-00003 clr / air (3/4" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.19 0.26 50<br />
00148-00004 clr / air (3/4" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.39 0.19 0.26 50<br />
00149-00001 lami / air (3/4" gap) / clr - (5mm-090SGP<br />
-5mm/DS)<br />
00149-00002 clr / air (3/4" gap) / lami - (DS/5mm-<br />
090SGP-5mm)<br />
00150-00001 lami / air (3/4" gap) / clr - (5mm-090SGP<br />
-5mm/DS)<br />
00150-00002 clr / air (3/4" gap) / lami - (DS/5mm-<br />
090SGP-5mm)<br />
00151-00001 lami / air (3/4" gap) / clr - (5mm-090SGP<br />
-5mm/5mm)<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.34 0.41 45<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.38 0.41 45<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.25 0.29 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.28 0.29 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 44<br />
Page 20
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
00151-00002 lami / air (3/4" gap) / clr - (5mm-090SGP<br />
-5mm/6mm)<br />
00151-00003 clr / air (3/4" gap) / lami - (5mm/5mm-<br />
090SGP-5mm)<br />
00151-00004 clr / air (3/4" gap) / lami - (6mm/5mm-<br />
090SGP-5mm)<br />
00152-00001 lami / air (3/4" gap) / clr - (5mm-090SGP<br />
-5mm/5mm)<br />
00152-00002 lami / air (3/4" gap) / clr - (5mm-090SGP<br />
-5mm/6mm)<br />
00152-00003 clr / air (3/4" gap) / lami - (5mm/5mm-<br />
090SGP-5mm)<br />
00152-00004 clr / air (3/4" gap) / lami - (6mm/5mm-<br />
090SGP-5mm)<br />
00153-00001 lami / air (3/4" gap) / clr - (5mm-090PVB-<br />
5mm/DS)<br />
00153-00002 clr / air (3/4" gap) / lami - (DS/5mm-<br />
090PVB-5mm)<br />
00154-00001 lami / air (3/4" gap) / clr - (5mm-090PVB-<br />
5mm/DS)<br />
00154-00002 clr / air (3/4" gap) / lami - (DS/5mm-<br />
090PVB-5mm)<br />
00155-00001 lami / air (3/4" gap) / clr - (5mm-090PVB-<br />
5mm/5mm)<br />
00155-00002 lami / air (3/4" gap) / clr - (5mm-090PVB-<br />
5mm/6mm)<br />
00155-00003 clr / air (3/4" gap) / lami - (5mm/5mm-<br />
090PVB-5mm)<br />
00155-00004 clr / air (3/4" gap) / lami - (6mm/5mm-<br />
090PVB-5mm)<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.24 0.29 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.24 0.29 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.27 0.29 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.27 0.29 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.34 0.42 45<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.38 0.42 45<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.25 0.30 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.28 0.30 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.33 0.41 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) N CL 0.42 0.36 0.41 44<br />
Page 21
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
00156-00001 lami / air (3/4" gap) / clr - (5mm-090PVB-<br />
5mm/5mm)<br />
00156-00002 lami / air (3/4" gap) / clr - (5mm-090PVB-<br />
5mm/6mm)<br />
00156-00003 clr / air (3/4" gap) / lami - (5mm/5mm-<br />
090PVB-5mm)<br />
00156-00004 clr / air (3/4" gap) / lami - (6mm/5mm-<br />
090PVB-5mm)<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.24 0.29 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.24 0.29 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.27 0.29 44<br />
WD/WD 2 0.750 A1-D Fill 1: AIR (100) T 1.50 CL 0.45 0.27 0.29 44<br />
00157-00001 lami - (5mm-090SGP-5mm) WD/WD 1 N N CL 0.68 0.39 0.46 17<br />
00158-00001 SB70 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 A8-S Fill 1: AIR (100) N CL 0.32 0.16 0.34 57<br />
00158-00002 SB70 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 A8-S Fill 1: AIR (100) N CL 0.32 0.16 0.34 57<br />
00158-00003 clr / air (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 A8-S Fill 1: AIR (100) N CL 0.32 0.21 0.34 57<br />
00158-00004 clr / air (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 A8-S Fill 1: AIR (100) N CL 0.32 0.21 0.34 57<br />
00159-00001 SN68 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 A8-S Fill 1: AIR (100) N CL 0.33 0.21 0.36 56<br />
00159-00002 SN68 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 A8-S Fill 1: AIR (100) N CL 0.33 0.21 0.36 56<br />
00159-00003 clr / air (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 A8-S Fill 1: AIR (100) N CL 0.33 0.25 0.36 56<br />
00159-00004 clr / air (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 A8-S Fill 1: AIR (100) N CL 0.33 0.25 0.36 56<br />
00160-00001 SB70 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 A8-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.15 0.34 60<br />
00160-00002 SB70 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 A8-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.15 0.34 60<br />
00160-00003 clr / arg (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 A8-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.34 60<br />
00160-00004 clr / arg (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 A8-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.34 60<br />
00161-00001 SN68 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 A8-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.36 60<br />
00161-00002 SN68 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 A8-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.36 60<br />
00161-00003 clr / arg (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 A8-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.26 0.36 60<br />
Page 22
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00161-00004 clr / arg (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 A8-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.26 0.36 60<br />
00162-00001 SB70 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 CU-D Fill 1: AIR (100) N CL 0.33 0.16 0.34 55<br />
00162-00002 SB70 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 CU-D Fill 1: AIR (100) N CL 0.33 0.16 0.34 55<br />
00162-00003 clr / air (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 CU-D Fill 1: AIR (100) N CL 0.33 0.21 0.34 55<br />
00162-00004 clr / air (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 CU-D Fill 1: AIR (100) N CL 0.33 0.21 0.34 55<br />
00163-00001 SN68 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 CU-D Fill 1: AIR (100) N CL 0.33 0.21 0.36 54<br />
00163-00002 SN68 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 CU-D Fill 1: AIR (100) N CL 0.33 0.21 0.36 54<br />
00163-00003 clr / air (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 CU-D Fill 1: AIR (100) N CL 0.33 0.25 0.36 54<br />
00163-00004 clr / air (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 CU-D Fill 1: AIR (100) N CL 0.33 0.25 0.36 54<br />
00164-00001 SB70 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 CU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.15 0.34 58<br />
00164-00002 SB70 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 CU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.15 0.34 58<br />
00164-00003 clr / arg (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 CU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.34 58<br />
00164-00004 clr / arg (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 CU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.34 58<br />
00165-00001 SN68 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 CU-D Fill 1: ARG/AIR (90/10) N CL 0.31 0.21 0.36 57<br />
00165-00002 SN68 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 CU-D Fill 1: ARG/AIR (90/10) N CL 0.31 0.21 0.36 57<br />
00165-00003 clr / arg (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 CU-D Fill 1: ARG/AIR (90/10) N CL 0.31 0.26 0.36 57<br />
00165-00004 clr / arg (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 CU-D Fill 1: ARG/AIR (90/10) N CL 0.31 0.26 0.36 57<br />
00166-00001 SB70 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 OF-S Fill 1: AIR (100) N CL 0.32 0.16 0.34 59<br />
00166-00002 SB70 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 OF-S Fill 1: AIR (100) N CL 0.32 0.16 0.34 59<br />
00166-00003 clr / air (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 OF-S Fill 1: AIR (100) N CL 0.32 0.21 0.34 59<br />
00166-00004 clr / air (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 OF-S Fill 1: AIR (100) N CL 0.32 0.21 0.34 59<br />
00167-00001 SN68 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 OF-S Fill 1: AIR (100) N CL 0.32 0.21 0.36 58<br />
Page 23
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00167-00002 SN68 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 OF-S Fill 1: AIR (100) N CL 0.32 0.21 0.36 58<br />
00167-00003 clr / air (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 OF-S Fill 1: AIR (100) N CL 0.32 0.25 0.36 58<br />
00167-00004 clr / air (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 OF-S Fill 1: AIR (100) N CL 0.32 0.25 0.36 58<br />
00168-00001 SB70 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 OF-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.15 0.34 61<br />
00168-00002 SB70 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 OF-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.15 0.34 61<br />
00168-00003 clr / arg (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 OF-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.21 0.34 61<br />
00168-00004 clr / arg (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 OF-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.21 0.34 61<br />
00169-00001 SN68 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 OF-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.36 61<br />
00169-00002 SN68 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 OF-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.36 61<br />
00169-00003 clr / arg (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 OF-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.26 0.36 61<br />
00169-00004 clr / arg (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 OF-S Fill 1: ARG/AIR (90/10) N CL 0.30 0.26 0.36 61<br />
00170-00001 SB70 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 P1-S Fill 1: AIR (100) N CL 0.31 0.16 0.34 60<br />
00170-00002 SB70 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 P1-S Fill 1: AIR (100) N CL 0.31 0.16 0.34 60<br />
00170-00003 clr / air (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 P1-S Fill 1: AIR (100) N CL 0.31 0.21 0.34 60<br />
00170-00004 clr / air (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 P1-S Fill 1: AIR (100) N CL 0.31 0.21 0.34 60<br />
00171-00001 SN68 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 P1-S Fill 1: AIR (100) N CL 0.32 0.21 0.36 59<br />
00171-00002 SN68 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 P1-S Fill 1: AIR (100) N CL 0.32 0.21 0.36 59<br />
00171-00003 clr / air (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 P1-S Fill 1: AIR (100) N CL 0.32 0.25 0.36 59<br />
00171-00004 clr / air (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 P1-S Fill 1: AIR (100) N CL 0.32 0.25 0.36 59<br />
00172-00001 SB70 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 P1-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.15 0.34 61<br />
00172-00002 SB70 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 P1-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.15 0.34 61<br />
00172-00003 clr / arg (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 P1-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.21 0.34 61<br />
Page 24
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00172-00004 clr / arg (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 P1-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.21 0.34 61<br />
00173-00001 SN68 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 P1-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.21 0.36 61<br />
00173-00002 SN68 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 P1-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.21 0.36 61<br />
00173-00003 clr / arg (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 P1-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.26 0.36 61<br />
00173-00004 clr / arg (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 P1-S Fill 1: ARG/AIR (90/10) N CL 0.29 0.26 0.36 61<br />
00174-00001 SB70 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 SS-D Fill 1: AIR (100) N CL 0.32 0.16 0.34 57<br />
00174-00002 SB70 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 SS-D Fill 1: AIR (100) N CL 0.32 0.16 0.34 57<br />
00174-00003 clr / air (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 SS-D Fill 1: AIR (100) N CL 0.32 0.21 0.34 57<br />
00174-00004 clr / air (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 SS-D Fill 1: AIR (100) N CL 0.32 0.21 0.34 57<br />
00175-00001 SN68 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 SS-D Fill 1: AIR (100) N CL 0.33 0.21 0.36 56<br />
00175-00002 SN68 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 SS-D Fill 1: AIR (100) N CL 0.33 0.21 0.36 56<br />
00175-00003 clr / air (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 SS-D Fill 1: AIR (100) N CL 0.33 0.25 0.36 56<br />
00175-00004 clr / air (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 SS-D Fill 1: AIR (100) N CL 0.33 0.25 0.36 56<br />
00176-00001 SB70 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 SS-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.15 0.34 60<br />
00176-00002 SB70 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 SS-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.15 0.34 60<br />
00176-00003 clr / arg (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 SS-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.34 60<br />
00176-00004 clr / arg (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 SS-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.34 60<br />
00177-00001 SN68 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 SS-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.36 59<br />
00177-00002 SN68 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 SS-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.36 59<br />
00177-00003 clr / arg (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 SS-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.26 0.36 59<br />
00177-00004 clr / arg (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 SS-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.26 0.36 59<br />
00178-00001 SB70 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 SU-D Fill 1: AIR (100) N CL 0.32 0.16 0.34 57<br />
Page 25
<strong>NFRC</strong> <strong>Product</strong> <strong>Certification</strong> <strong>Authorization</strong> <strong>Report</strong><br />
Manufacturer: <strong>ETO</strong> <strong>Doors</strong>, Corp. <strong>Product</strong> Series: Premium Solid Wood,<br />
Mahogany, Alder and<br />
White Primed <strong>Doors</strong> for<br />
Interior, Exterior and Patio<br />
Door Applications (with or<br />
without lites)<br />
Simulation Lab: SATI Initial Cert. Date: 03/09/2011<br />
Street: 801 E 7th Street <strong>Product</strong> Type: EDSL Sim. <strong>Report</strong> #: A2256.01-116-45 Re-<strong>Certification</strong> Date:<br />
City/State/Zip: Los Angeles, CA 90021 Air Leakage: Sim. <strong>Report</strong> Date: 12/20/2010 Revised Date:<br />
Print Date: 03/23/2011 Test Date: 10/08/2010 Expiration Date: 10/08/2014<br />
CPD Number: <strong>ETO</strong>-M-1 IA: National Accreditation And Management Institute<br />
Status <strong>Product</strong> Num. Manufacturer Code Frame/<br />
Sash<br />
Glaz<br />
Lyrs<br />
Low-E (Surface) Gap Width(s) Spacer Gap Fill Grids Dividers Tint U-Factor SHGC VT Cond.<br />
Res.<br />
00178-00002 SB70 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 SU-D Fill 1: AIR (100) N CL 0.32 0.16 0.34 57<br />
00178-00003 clr / air (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 SU-D Fill 1: AIR (100) N CL 0.32 0.21 0.34 57<br />
00178-00004 clr / air (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 SU-D Fill 1: AIR (100) N CL 0.32 0.21 0.34 57<br />
00179-00001 SN68 / air (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 SU-D Fill 1: AIR (100) N CL 0.32 0.21 0.36 57<br />
00179-00002 SN68 / air (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 SU-D Fill 1: AIR (100) N CL 0.32 0.21 0.36 57<br />
00179-00003 clr / air (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 SU-D Fill 1: AIR (100) N CL 0.32 0.25 0.36 57<br />
00179-00004 clr / air (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 SU-D Fill 1: AIR (100) N CL 0.32 0.25 0.36 57<br />
00180-00001 SB70 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.018(2) 0.500 SU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.15 0.34 61<br />
00180-00002 SB70 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.018(2) 0.500 SU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.15 0.34 61<br />
00180-00003 clr / arg (1/2" gap) / SB70 - (5mm/5mm) WD/WD 2 0.018(3) 0.500 SU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.34 61<br />
00180-00004 clr / arg (1/2" gap) / SB70 - (6mm/6mm) WD/WD 2 0.018(3) 0.500 SU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.34 61<br />
00181-00001 SN68 / arg (1/2" gap) / clr - (5mm/5mm) WD/WD 2 0.039(2) 0.500 SU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.36 60<br />
00181-00002 SN68 / arg (1/2" gap) / clr - (6mm/6mm) WD/WD 2 0.039(2) 0.500 SU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.21 0.36 60<br />
00181-00003 clr / arg (1/2" gap) / SN68 - (5mm/5mm) WD/WD 2 0.039(3) 0.500 SU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.26 0.36 60<br />
00181-00004 clr / arg (1/2" gap) / SN68 - (6mm/6mm) WD/WD 2 0.039(3) 0.500 SU-D Fill 1: ARG/AIR (90/10) N CL 0.30 0.26 0.36 60<br />
00182-00001 NO LITE // E230 WD/WD 0 N N OT 0.39 0.02 0.00<br />
00183-00001 NO LITE // KNOTTY ALDER WD/WD 0 N N OT 0.40 0.04 0.00<br />
00184-00001 NO LITE // PAINT GRADE WD/WD 0 N N OT 0.42 0.02 0.00<br />
00185-00001 NO LITE // PINE CORE WD/WD 0 N N OT 0.40 0.02 0.00<br />
00186-00001 NO LITE // RM1 V-GROOVE WD/WD 0 N N OT 0.39 0.02 0.00<br />
00187-00001 NO LITE // SIX PANEL WD/WD 0 N N OT 0.40 0.02 0.00<br />
Page 26
Baseline Information<br />
Test Lab Test Date Test Size Tested U-Value Standard U-Value Test <strong>Report</strong><br />
Number<br />
TATF 10/08/2010 953 mm x 2092 mm 0.406 0.383 A2257.01-301-46<br />
Comments:<br />
I hereby certify that all requirements for <strong>NFRC</strong> <strong>Certification</strong> <strong>Authorization</strong> have been met and that the above information is true and correct, to the best of my knowledge.<br />
Authorized IA<br />
Signature:<br />
Page 27
Change language