ETC Ion - Theatre Uwinnipeg

To add parameters to a new fixture:
Step 1: Use the [Page] keys to select the new fixture from the fixture list.
Step 2: Click {Edit}. That fixture will open in a new display in the CIA.
Note:
Step 3: Determine the total number of parameters that your fixture has. Do not count 16-bit
channels as two channels, this will be done in a later step.
Step 4: Click {New} to add parameter slots. Repeat this step until you have as many slots as
are required by the number determined in step 1.
When {New} is clicked, the parameter slot will appear in the list with a default
name in the “Parameter” column. You may disregard these default parameters as
you will redefine the designations in a later step.
Step 5: Use the [Page] keys to navigate to any parameter slots that you wish to alter the
default parameter designations for.
Step 6: When you have selected a slot, click {Parameters}. The CIA will display buttons
representing all of the available parameters.
a: Click the {>>} and {