ETC Ion - Theatre Uwinnipeg

To open only partial components from a show file:
Step 1: From the browser, navigate to the desired show file (see Open the desired location:,
page 48).
Step 2: When the partial show load screen appears, click the {Advanced} button. The partial
components selection screen will appear in the CIA.
Step 3: Select the show components that you wish to load by clicking on their respective
buttons on the left side of the CIA. The components will appear in the list to the right
as you select them.
Step 4: Click any fields for which you want to enter specific numbers. The field (if editable) will
highlight in gold.
Step 5: Enter the numbers using the keypad to specify the desired cues/groups/effects and so
on.
Step 6: Click {OK} to load the components to the new show.
You may exit the partial show load screen at any time by clicking the {Cancel} button. This will
return you to the browser.
You may clear all selected components from the table at any time by clicking the {Reset} button.
You may exit the advanced loading screen at any time by clicking the {Advanced} button. This will
return you to the general partial show load screen.
4 Managing Show Files 51