ETC Ion - Theatre Uwinnipeg

• IP, CP, FP, BP . . . . . . . .Indicates that the value is referenced to a palette (Intensity,
Color, Focus, or Beam). This text is followed by a number,
indicating which palette is being referenced. This can be
substituted with the palette label if the “Show Reference
Label” setting is activated (see Show Reference Labels, page
103). Holding down [Label] will toggle between the palette
label and palette number.
• MK . . . . . . . . . . . . . . . . .Indicates the channel is marked for a later cue. The cue
number is indicated in the other categories (see “Q” below).
• N. . . . . . . . . . . . . . . . . . .Indicates the value is null (from either {Make Null} or a filter).
• P . . . . . . . . . . . . . . . . . . .Indicates the channel is parked.
• Ph. . . . . . . . . . . . . . . . . .Indicates the channel is at a preheat level.
• Pr . . . . . . . . . . . . . . . . . .Indicates that the value is referenced to a preset. This text is
followed by a number, indicating which preset is being
referenced. The preset label may also be shown if this setting
is enabled (see Show Reference Labels, page 103). Holding
down [Label] will toggle between the preset label and preset
number.
• Q. . . . . . . . . . . . . . . . . . .Found in the non-intensity categories of a marked channel.
The “Q” is followed by a number indicating which cue the
mark is in preparation for.
• t . . . . . . . . . . . . . . . . . . .The channel has discrete (parameter/category-specific)
timing.
• + . . . . . . . . . . . . . . . . . . .Found in place of parameter data in summary view. Indicates
that not all parameters in that category are at the same value.
This indicator is found only in the summary view or in table
views when the parameters are collapsed into a category
view.
• ! . . . . . . . . . . . . . . . . . . .Indicates an ACN or RDM error.
The symbols that appear in the Mark flag include:
• D. . . . . . . . . . . . . . . . . . .AutoMark is disabled.
• R. . . . . . . . . . . . . . . . . . .Indicates a manual reference override. Manual changes have
been made that override a previously stored reference (such
as to a palette or preset). Once recorded, the reference will
be broken. If updated, the referenced target will be updated
as well, unless otherwise instructed.
• M . . . . . . . . . . . . . . . . . .Indicates a mark is placed, but manual, and must be stored.
Is blue when stored.”m” indicates cue is not marking.
• + . . . . . . . . . . . . . . . . . . .Indicates a cue is both a marking and reference cue when
displayed in the mark flag.
• - . . . . . . . . . . . . . . . . . . .Indicates a dark move, a cue that has any non-intensity
parameters moving on channels whose intensity is at 0.
• x . . . . . . . . . . . . . . . . . .Indicates that a mark has been placed, but the mark is
broken.
38 Ion Operations Manual