ETC Ion - Theatre Uwinnipeg

External Monitor Arrangement
The number on the
monitors matches the
number of the video port
on the rear of the console.
Ion allows for up to two monitors. The first time Ion boots with two monitors, it may not display
output to both. You will need to configure the monitors in {External Monitor Arrangement} under
{General} in the ECU.
To configure dual monitors:
Step 1: Click an available monitor once to select it. The monitor will now be outlined in yellow.
Step 2: Click on the open left position under Monitor Arrangement. The second monitor will
drop down into the open left position.
Step 3: Click on {Apply}.
Step 4: Click on {Accept} on the General screen.
Once you launch the Ion application, you will then have displays on both the monitors.
Ion Software Update
Available
Selected
This option is used to update the software of the Ion console itself. It does not affect or update the
software in any other networked device such as a Net3 Gateway.
When you click on {Software Update}, the Ion console looks at the root directory of any connected
USB drive for an Ion console software update file.You will be shown the names of any updater files
found on the drive. Select the file you would like to install and click the {Install} button, or click
{Cancel}.
You will also receive a message if no software update file can be found.
298 Ion Operations Manual