24.08.2013 Views

ETC Ion - Theatre Uwinnipeg

ETC Ion - Theatre Uwinnipeg

ETC Ion - Theatre Uwinnipeg

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Using Partitions<br />

When partitions are enabled and a partition is selected, you may only record data for the channels<br />

included in the partition, with the exception of parking and unparking channel parameters or playing<br />

back cues. If you try to control a channel that is not in your partition, you must confirm that you want<br />

to control that channel. You will not, however, be able to store information for that channel.<br />

If you select a range of channels and set them to a level and some of those channels are not<br />

included in the partition, you must confirm the command. After which, the command will be allowed<br />

on the channels not in the partition<br />

When you record a target (cue, preset, palette), only those channels that are partitioned to you are<br />

recorded. Other programmers’ record actions to the same target can add to it (they do not replace<br />

it) unless channels are shared. When shared, the last value provided at the point of the record<br />

action will be stored.<br />

Partitions in Playback<br />

In general, partitions do not affect playback. In <strong>Ion</strong>, how faders are configured and what is loaded<br />

to those faders is shared across all control devices.<br />

When cues are played back from any console, regardless of partitions, that cue will be played back<br />

in its entirety. This ensures that while partitions are used, any user can activate a cue and all users<br />

will see that cue played back on the system.<br />

To facilitate partitioned programming, <strong>Ion</strong> allows you to change the fader number of the master<br />

fader pair on any console. This allows you to have different cue lists on the master fader pair of any<br />

consoles on the network. Using this feature, programmers can work within their partitions, using the<br />

master fader pair for their specific cue list, without affecting the cue list that is loaded to the master<br />

fader of another console.<br />

Flexichannel in Partitioned Control<br />

When partitioning is enabled, a new flexi state, "Partitioned" is available as a softkey. When this is<br />

enabled, the flexi state is limited to only those channels defined in the current partition. This view<br />

may be further modified by use of the remaining flexi states.<br />

292 <strong>Ion</strong> Operations Manual

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!