ETC Ion - Theatre Uwinnipeg

Using the Preset List
The preset list displays all recorded presets. List views only allow you to change attributes; no
editing can be done directly in list view. Pressing the {Edit} softkey takes you to the blind view of the
selected preset, in the last format you used in blind. This will allow you to edit the preset.
You can navigate the preset list using [Next] and [Last].
Opening the Preset List
Blind presets can also be viewed in the preset list and can be accessed in a number of ways.
To view the preset list in blind you may:
• Press [Preset] [Preset]
• Click on Preset List in the Browser>Record Target Lists
Move To
You can move presets within the preset list using the {Move To} softkey. You can also hit [Copy To]
[Copy To] to access {Move To}.
• [3] {Move To} [8] [Enter] [Enter] - moves preset 3 to preset 8. Preset 3 will be
removed from the list. The second [Enter] is not required if you have disabled confirmations
in setup.
You can also move data from a palette to a preset and vice versa. It is important to remember that
when using the {Move To} command that data is removed from its current location and moved to its
new location.
Copy To
You can copy presets within the list to another location in the list using [Copy To].
• [2] [Copy To] [9] [Enter] [Enter] - copies the contents of preset 2 to preset 9.
Preset 2 will remain in the list. The second [Enter] is not required if you have disabled
confirmations in setup.
You can also use [Copy To] from palettes to presets.
134 Ion Operations Manual