ETA-10-0423-ATS evo - Etanco
ETA-10-0423-ATS evo - Etanco
ETA-10-0423-ATS evo - Etanco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Page 9 of <strong>ETA</strong>-<strong>10</strong>/<strong>0423</strong>, issued on 13.12.20<strong>10</strong>, English translation prepared by ZAG<br />
Type B with threaded bar Type SK with<br />
countershunk screw<br />
<strong>ATS</strong> <strong>evo</strong><br />
Product and intended use<br />
Type S with screw<br />
Annex 1<br />
Sleeve for M16 size<br />
of the European Technical<br />
Approval<br />
<strong>ETA</strong>–<strong>10</strong>/<strong>0423</strong><br />
(SH)<br />
Marking: Identification mark of the producer - trade name of the anchor<br />
nominal drill hole diameter / max thickness of fixture<br />
(and line for minimum embedment and max thickness of fixture)<br />
e.g.: FM-<strong>ATS</strong><br />
Ø15/20<br />
L = length of the anchor (mm)<br />
tfix = thickness of fixture (mm)<br />
d0 = nominal drill hole diameter (mm)<br />
hnom = minimum installation depth (mm)<br />
hef = effective anchorage depth (mm)<br />
df = diameter of clearance hole in the fixture (mm)<br />
h1 = depth of drill hole (mm)<br />
hmin = minimum thickness of the concrete member (mm)<br />
Tinst = torque moment (Nm)