Operation - Wacker Neuson
Operation - Wacker Neuson
Operation - Wacker Neuson
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.4 Hydraulic control<br />
5.4.1 Check oil level:<br />
1. Move centre pole into vertical position.<br />
2. Open filler bore (26).<br />
T00997GB.fm 39<br />
Maintenance<br />
3. Oil level must be at mark, if necesary top up with hydraulic oil Fuchs<br />
Renolin MR 520.<br />
4. Close filler bore (26).<br />
5.4.2 Venting hydraulic control:<br />
1. Remove apron (28) by undoing the screws (29).<br />
2. Move centre pole into vertical position, move shift lever (6) right into<br />
the reverse position, open filler bore (26).<br />
3. Loosen connecting screw (27).<br />
4. Slowly push the shift lever (6) into forward motion direction until<br />
hydraulic oil emerges bubblefree at the connection screw.<br />
5. Tighten connecting screw (27), mount apron (28).<br />
6. If necessary, top up with Fuchs Renolin MR 520, seal filler bore (26).