Operation - Wacker Neuson
Operation - Wacker Neuson
Operation - Wacker Neuson
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance<br />
5. Maintenance<br />
5.1 Maintenance schedule<br />
Component Maintenance work<br />
Drive engine First oil change and filter.<br />
Valve clearance<br />
Air filter<br />
T00997GB.fm 36<br />
Cold engine: Check valve clearance, and adjust if<br />
necessary.<br />
Inlet valve 0,1 mm - outlet valve 0,2 mm.<br />
Check dry type air filter - clean or replace filter<br />
cartridge if necessary (pay attention to the<br />
maintenance indication). daily<br />
Drive engine Check oil level, if nec. top up oil.<br />
Centre pole height<br />
setting, transport lock<br />
Regrease. weekly<br />
V-belt Check V-belt, if. nec. replace.<br />
Protective frame<br />
Central lifting point<br />
Check attachment screws for tight fit.<br />
Tow-bar head Check oil level, top up if necessary.<br />
Drive engine<br />
Exciter Oil change.<br />
Oil change, change oil filter.<br />
Keep cooling fins free of dirt, clean dry.<br />
Retighten all accessible screw connections.<br />
Battery Check acid level, if nec. top up with distilled water.<br />
Valve clearance<br />
Cold engine: Check valve clearance, and adjust<br />
if necessary.<br />
Inlet valve 0,1 mm - outlet valve 0,2 mm.<br />
Maintenance<br />
interval<br />
approx. 8 hours<br />
after initial start-up<br />
monthly<br />
every 250 h<br />
Fuel filter Change filter. every 500 h
Change language