CutMaster True Service Manual - Victor Technologies - Europe
CutMaster True Service Manual - Victor Technologies - Europe
CutMaster True Service Manual - Victor Technologies - Europe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Signal Information<br />
Many of the signal listed will be low voltage signals<br />
that will be in one of two states: +12VDC (High) or<br />
0VDC (Low) with respect to pcb common.. When a<br />
signal name is preceded by the “/” mark, it denotes<br />
that the signal is an active low. For example:<br />
/OVERTEMP – This signal is normally High but<br />
when an over temperature fault exists, this line will<br />
change state to a Low.<br />
CUTMASTER 25mm<br />
<strong>Manual</strong> 0-5081 5-21 SERVICE