CutMaster True Service Manual - Victor Technologies - Europe

More documents

Recommendations

Info

WE APPRECIATE YOUR BUSINESS! Congratulations on your new Thermal Dynamics product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This product is backed by our extensive warranty and world-wide service network. To locate your nearest distributor or service agency call 1-800-426- 1888, or visit us on the web at www.thermal-dynamics.com. This Operating Manual has been designed to instruct you on the correct use and operation of your Thermal Dynamics product. Your satisfaction with this product and its safe operation is our ultimate concern. Therefore please take the time to read the entire manual, especially the Safety Precautions. They will help you to avoid potential hazards that may exist when working with this product. YOU ARE IN GOOD COMPANY! The Brand of Choice for Contractors and Fabricators Worldwide. Thermal Dynamics is a Global Brand of manual and automation Plasma Cutting Products for Thermadyne Industries Inc. We distinguish ourselves from our competition through marketleading, dependable products that have stood the test of time. We pride ourselves on technical innovation, competitive prices, excellent delivery, superior customer service and technical support, together with excellence in sales and marketing expertise. Above all, we are committed to developing technologically advanced products to achieve a safer working environment within the welding industry.
! WARNINGS Read and understand this entire Manual and your employer’s safety practices before installing, operating, or servicing the equipment. While the information contained in this Manual represents the Manufacturer's best judgement, the Manufacturer assumes no liability for its use. Plasma Cutting Power Supply CutMaster 25mm SL60 1Torch Service Manual Number 0-5081 Published by: Thermal Dynamics Corporation 82 Benning Street West Lebanon, New Hampshire, USA 03784 (603) 298-5711 www.thermal-dynamics.com Copyright 2009 by Thermadyne Corporation All rights reserved. Reproduction of this work, in whole or in part, without written permission of the publisher is prohibited. The publisher does not assume and hereby disclaims any liability to any party for any loss or damage caused by any error or omission in this Manual, whether such error results from negligence, accident, or any other cause. Printed in the United States of America Original Publication Date: January 9, 2009 Revision Date: May 29, 2009 Record the following information for Warranty purposes: Where Purchased:_______________________________ ________________ Purchase Date:__________________________________ ________________ Power Supply Serial #:___________________________ ________________ Torch Serial #:___________________________________ ________________ i
Page 1: 25mm CUTMASTER PLASMA CUTTING SYST
Page 5 and 6: TABLE OF CONTENTS SECTION 1:GENERAL
Page 7 and 8: TABLE OF CONTENTS APPENDIX 1: SEQUE
Page 9 and 10: SECTION 1: GENERAL INFORMATION 1.01
Page 11 and 12: 14. American Welding Society Standa
Page 13 and 14: 1.06 Documents De Reference Consult
Page 15 and 16: 1.08 Statement of Warranty CUTMASTE
Page 17 and 18: SECTION 2 SYSTEM: INTRODUCTION 2.01
Page 19 and 20: 2.05 Input Wiring Specifications 3
Page 21 and 22: SECTION 2 TORCH: INTRODUCTION 2T.01
Page 23 and 24: B. Gas Distribution The single gas
Page 25 and 26: 3.01 Unpacking SECTION 3 SYSTEM: IN
Page 27 and 28: For CE units: EMC Input Power Filte
Page 29 and 30: Installing Optional Single - Stage
Page 31 and 32: SECTION 3 TORCH: INSTALLATION 3T.01
Page 33 and 34: SECTION 4 SYSTEM: OPERATION 4.01 Fr
Page 35 and 36: STANDOFF CutMaster 25mm Gas Pressur
Page 37 and 38: SECTION 4 TORCH: OPERATION 4T.01 To
Page 39 and 40: Torch Standoff Improper standoff (t
Page 41 and 42: Shield Cup With Straight Edge The d
Page 43 and 44: 4T.05 Gouging ! WARNINGS Be sure th
Page 45 and 46: 4T.07 Parts Selection for Manual an
Page 47 and 48: CUTMASTER 25mm Type Torch: SL60 Wit
Page 49 and 50: CUTMASTER 25mm Type Torch: SL60 wit
Page 51 and 52: CUTMASTER 25mm Type Torch: SL60 Wit
Page 53 and 54:
CUTMASTER 25mm Type Torch: SL60 Wit
Page 55 and 56:
Catalog # Description Patent(s) 9-8
Page 57 and 58:
5.01 General Maintenance SECTION 5
Page 59 and 60:
5.04 Fault Indicator At initial pow
Page 61 and 62:
Problem - Symptom Possible Cause Re
Page 63 and 64:
5. Remove the fitting from the filt
Page 65 and 66:
B. Cover Installation 1. Reverse pr
Page 67 and 68:
9. Close torch switch (Pendant swit
Page 69 and 70:
3. Open or improperly connected rib
Page 71 and 72:
L. AC LED on, TEMP, GAS, DC LED's a
Page 73 and 74:
4. Shorted Torch a) Disconnect torc
Page 75 and 76:
5.12 Test Procedures A. Main Contac
Page 77 and 78:
Signal Information Many of the sign
Page 79 and 80:
B. CAPACITOR PCB TEST POINTS MTH1,2
Page 81 and 82:
CUTMASTER 25mm Signal Source/Destin
Page 83 and 84:
This Page Intentionally Blank CUTMA
Page 85 and 86:
J3-1 N/A J3-2 Common J4-1 3.3VDc J4
Page 87 and 88:
SECTION 5 TORCH: SERVICE 5T.01 Gene
Page 89 and 90:
6.01 Introduction A. Parts List Bre
Page 91 and 92:
6.05 Front Panel Replacement Parts
Page 93 and 94:
6.07 Right Side Replacement Parts C
Page 95 and 96:
6.09 Replacement Parts for Hand Tor
Page 97 and 98:
1 2 3 12 4 10 10 11 5 9 CUTMASTER 2
Page 99 and 100:
SECTION 7: REPLACEMENT PROCEDURES 7
Page 101 and 102:
7.05 Front Panel Parts Replacement
Page 103 and 104:
13. Remove the two screws securing
Page 105 and 106:
7.08 Right Side Internal Parts Repl
Page 107 and 108:
ACTION: Close external disconnect s
Page 109 and 110:
APPENDIX 3: TORCH PIN - OUT DIAGRAM
Page 111 and 112:
C. Automation Torch Connection Diag
Page 113 and 114:
CUTMASTER 25MM Manual 0-5081 A-7 AP
Page 115 and 116:
GLOBAL CUSTOMER SERVICE CONTACT The
show all

CutMaster True Service Manual - Victor Technologies - Europe

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?