CutMaster True Service Manual - Victor Technologies - Europe
CutMaster True Service Manual - Victor Technologies - Europe
CutMaster True Service Manual - Victor Technologies - Europe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installing Optional Single - Stage Air Filter<br />
CUTMASTER 25mm<br />
An optional filter kit is recommended for improved filtering with compressed air, to keep moisture and<br />
debris out of the torch.<br />
1. Attach the Single - Stage Filter Hose to the Inlet Port.<br />
2. Attach the Filter Assembly to the filter hose.<br />
3. Connect the air line to the Filter. The illustration shows typical fittings as an example.<br />
NOTE<br />
For a secure seal, apply thread sealant to the fitting threads, according to the maker's instructions. Do Not use<br />
Teflon tape as a thread sealer, as small particles of the tape may break off and block the small air passages in the<br />
torch. Connect as follows:<br />
Hose Clamp<br />
Gas Supply<br />
Hose<br />
Regulator/Filter<br />
Assembly<br />
1/4 NPT to 1/4"<br />
(6mm) Fitting<br />
Optional Single - Stage Filter Installation<br />
Inlet Port<br />
Art # A-07944<br />
<strong>Manual</strong> 0-5081 3-5 INSTALLATION