Recording Handbook - Hol.gr

Typical voltages for these signals are roughly 1 volt for line level
signals, and maybe 100 millivolts for a microphone (depends on the
microphone type).
Remember to give yourself plenty of room to mix. Often I see people
with the volume sliders all the way up. This gives no flexibility.
If you have input gain knobs, play/sing at a normal level through all
sources and adjust so that there's equal volume coming out at equal
slider positions, and so that you don't have to push the slider too
high to get a good amount of volume. Now you have total flexibility
to mix with.
Q1.3 What are some brands of 4-track machines?
62
62