AMILO Pro V2010 - Fujitsu UK

More documents

Recommendations

Info

Troubleshooting and tips The notebook's date or time is incorrect ► Double-click on the clock in the task bar and adjust the time. or ► Set the time and/or the date in the BIOS Setup Utility, in the Main menu. i If the date and time are repeatedly incorrect when you switch on the notebook, the buffer battery that supplies the internal clock is dead. Contact your sales outlet or our hotline/help desk. The LCD screen of the notebook remains blank The screen power-management feature may be active. ► Press any key to activate the display. The notebook is in Standby or Suspend mode. ► Press the Suspend/Resume button to end the Standby or Suspend mode. The display angle or brightness may not be properly adjusted. ► Change the display angle and set the brightness by pressing the key Fn together with the key F9 (darker) or F8 (brighter) until the picture appears correct. The notebook is set so that the picture only appears on the external screen. ► Press the key combination Fn + F3 to switch over the display to the LCD screen or to specify the simultaneous display on the LCD screen and the external screen. The external monitor stays blank Monitor is switched off ► Switch the external monitor on. Power saving has been activated (screen is blank) ► Press any key to continue. Brightness is set too dark ► Adjust the brightness of the monitor. Screen output is set to the notebook’s LCD screen ► Press the key combination Fn + F3 (selecting internal/external display). The external monitor's power cable or data cable is not connected properly ► Switch off the external monitor and the notebook. ► Check whether the power cable is plugged properly into the external monitor and into the power socket. 58 A26391-<strong>V2010</strong>-Z120-1-7619, edition 1
Troubleshooting and tips ► Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). ► Switch on the external monitor and the notebook. The external monitor is blank or the image is unstable (under Windows) The wrong external monitor has been selected or the wrong screen resolution has been set for the application programme. ► End the application programme under Windows with Alt + F4 . If the fault continues to occur after ending the programme, switch over to the notebook's internal LCD screen with Fn + F3 . ► Select the correct monitor or set the correct screen resolution. – Setting the screen resolution: Select Start - Control Panel - Appearance and Themes - Screen resolution - Advanced and then the screen resolution you require. – Selecting the monitor: Select the correct monitor under Start - Control Panel - Appearance and Themes - Display - Settings - Advanced - Display. The notebook cannot be started The battery is not installed correctly. ► Switch the notebook off. ► Check whether the battery is installed correctly in its compartment. ► Switch the notebook on. The battery is dead. ► Charge the battery. or ► Install a charged battery. or ► Connect the notebook via its power adapter to the mains outlet. The power adapter is not connected correctly. ► Switch the notebook off. ► Check whether the power adapter is connected correctly to the notebook. ► Check whether the power cable is plugged properly into the power adapter and into the mains outlet. ► Switch the notebook on. A26391-<strong>V2010</strong>-Z120-1-7619, edition 1 59
Page 1 and 2:
Professional Notebook EasyGuide AMI
Page 4 and 5:
This manual was produced by cognita
Page 6 and 7:
Microsoft, MS, MS-DOS, Windows, and
Page 8 and 9:
Contents Hard disk.................
Page 11 and 12:
Innovative technology ... and ergon
Page 13 and 14:
Notebook views In this section the
Page 15 and 16:
Right side panel 1 = Drive tray 2 =
Page 17 and 18: Important notes Here you will find
Page 19 and 20: Manufacturer’s notes Declarations
Page 21 and 22: Travelling with your notebook Pleas
Page 23 and 24: Using your notebook for the first t
Page 25: Connecting the power adapter ! 3 Us
Page 28 and 29: Using your notebook Switching off t
Page 30 and 31: Using your notebook Caps Lock Alt G
Page 32 and 33: Using your notebook Key combination
Page 34 and 35: Using your notebook The touchpad en
Page 36 and 37: Using your notebook Monitor setting
Page 38 and 39: Using your notebook Removing batter
Page 40 and 41: Using your notebook Using the power
Page 42 and 43: Using your notebook Removing a PC c
Page 44 and 45: Using your notebook DVD+RW drive !
Page 46 and 47: Using your notebook Manual removal
Page 48 and 49: Using your notebook Audio: Setting
Page 50 and 51: Using your notebook Ethernet and LA
Page 52 and 53: Security functions Brief overview o
Page 54 and 55: Security functions Set the supervis
Page 57 and 58: Connecting external devices ! i Bef
Page 59 and 60: Connections on the left side DC jac
Page 61 and 62: Connecting external devices Setting
Page 63: Memory expansion ! The memory modul
Page 66 and 67: Settings in BIOS Setup Utility Exit
Page 70 and 71: Troubleshooting and tips Operating
Page 72 and 73: Troubleshooting and tips Keyboard c
Page 74 and 75: Technical data Ports Monitor port:
Page 76 and 77: Index E Easy Launch keys 3, 23 Elec
Page 78: Index T Time daylight savings 58 no
show all

AMILO Pro V2010 - Fujitsu UK

Create successful ePaper yourself

Delete template?

Save as template?