AMILO Pro V2010 - Fujitsu UK
AMILO Pro V2010 - Fujitsu UK AMILO Pro V2010 - Fujitsu UK
Connecting external devices Connections on the right side Headphones port Connecting an external monitor DVD ROM An external monitor can be connected to the notebook. ● Using the Fn + F3 key combination you can switch back and forth between the external monitor and the LCD screen. ● If your notebook is equipped with a TFT monitor, you can display the same picture on the external monitor and the LCD screen simultaneously. ► Switch off the notebook and the external monitor. ► Connect the external monitor to the monitor port on your notebook. ► First switch on the monitor and then the notebook. 50 A26391-V2010-Z120-1-7619, edition 1
Connecting external devices Setting the refresh rate for your external monitor The refresh rate must be correctly set so that the image does not flicker. ► Select the monitor type in the menu Start - Control Panel - Appearance and Themes - Display - Settings - Advanced - Display. ► Now select the Adapter tab. ► Adjust the refresh rate and then click Apply. ! If the refresh rate set is too high, the monitor may be damaged. Please see the documentation included with your monitor for the maximum possible refresh rate. Connecting USB devices On the USB ports you can connect external devices that also have a USB port (e.g. a printer, a scanner or a modem). i USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbit / s. USB 2.x has a data transfer rate of up to 480 Mbit/s. Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. i Device drivers Some USB devices will be automatically recognised and installed by your operating system. However, newer devices will need to be installed using the supplied CD / DVD. Always follow the instructions supplied with the device to complete the installation. A26391-V2010-Z120-1-7619, edition 1 51
- Page 11 and 12: Innovative technology ... and ergon
- Page 13 and 14: Notebook views In this section the
- Page 15 and 16: Right side panel 1 = Drive tray 2 =
- Page 17 and 18: Important notes Here you will find
- Page 19 and 20: Manufacturer’s notes Declarations
- Page 21 and 22: Travelling with your notebook Pleas
- Page 23 and 24: Using your notebook for the first t
- Page 25: Connecting the power adapter ! 3 Us
- Page 28 and 29: Using your notebook Switching off t
- Page 30 and 31: Using your notebook Caps Lock Alt G
- Page 32 and 33: Using your notebook Key combination
- Page 34 and 35: Using your notebook The touchpad en
- Page 36 and 37: Using your notebook Monitor setting
- Page 38 and 39: Using your notebook Removing batter
- Page 40 and 41: Using your notebook Using the power
- Page 42 and 43: Using your notebook Removing a PC c
- Page 44 and 45: Using your notebook DVD+RW drive !
- Page 46 and 47: Using your notebook Manual removal
- Page 48 and 49: Using your notebook Audio: Setting
- Page 50 and 51: Using your notebook Ethernet and LA
- Page 52 and 53: Security functions Brief overview o
- Page 54 and 55: Security functions Set the supervis
- Page 57 and 58: Connecting external devices ! i Bef
- Page 59: Connections on the left side DC jac
- Page 63: Memory expansion ! The memory modul
- Page 66 and 67: Settings in BIOS Setup Utility Exit
- Page 68 and 69: Troubleshooting and tips The notebo
- Page 70 and 71: Troubleshooting and tips Operating
- Page 72 and 73: Troubleshooting and tips Keyboard c
- Page 74 and 75: Technical data Ports Monitor port:
- Page 76 and 77: Index E Easy Launch keys 3, 23 Elec
- Page 78: Index T Time daylight savings 58 no
Connecting external devices<br />
Connections on the right side<br />
Headphones port<br />
Connecting an external monitor<br />
DVD<br />
ROM<br />
An external monitor can be connected to the notebook.<br />
● Using the Fn + F3 key combination you can switch back and forth between the external<br />
monitor and the LCD screen.<br />
● If your notebook is equipped with a TFT monitor, you can display the same picture on the<br />
external monitor and the LCD screen simultaneously.<br />
► Switch off the notebook and the external monitor.<br />
► Connect the external monitor to the monitor port on your notebook.<br />
► First switch on the monitor and then the notebook.<br />
50 A26391-<strong>V2010</strong>-Z120-1-7619, edition 1
Change language