TNC 320 - TNC 640 - DR. JOHANNES HEIDENHAIN GmbH
TNC 320 - TNC 640 - DR. JOHANNES HEIDENHAIN GmbH
TNC 320 - TNC 640 - DR. JOHANNES HEIDENHAIN GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Machining cylindrical surfaces*<br />
With the <strong>TNC</strong> <strong>320</strong> it is quite easy to<br />
program contours (which consist of straight<br />
lines and arcs) on cylindrical surfaces using<br />
rotary and tilting tables: You simply<br />
program the contour in a plane as if the<br />
cylinder surface were unrolled. You enter a<br />
contour in two dimensions—as if in a<br />
plane—and the <strong>TNC</strong> <strong>320</strong> then calculates<br />
and machines the corresponding cylindrical<br />
contour.<br />
The <strong>TNC</strong> <strong>320</strong> features three cycles for<br />
cylindrical surface machining:<br />
Slot milling (the slot width is the same as<br />
the tool diameter)<br />
Guide-groove milling (the slot width is<br />
greater than the tool diameter)<br />
Ridge milling<br />
* The machine must be prepared by the machine tool<br />
builder for this function.<br />
13