34049x-02 - DR. JOHANNES HEIDENHAIN GmbH

New Programming Functions
– smarT.NC
Mid-program startup with graphic
support (upgrade function)
The pattern generator in smarT.NC is a
powerful feature for defi ning machining
positions fl exibly and with graphic support.
The positions are saved blockwise in point
tables for convenient reuse at other
locations for other operations. Now the reentry
into a machining program has been
adapted to this fl exible function: smarT.NC
detects your entry into a unit in which
machining positions are defi ned, and
symbolically displays the positions in a
preview window. You can now select via
soft key at which position you would like to
begin machining. smarT.NC then automatically
inserts the appropriate tool and
traverses to the selected position—of
course only after your approval.
CUT/COPY/PASTE of one or more units
Using the key combinations you are
familiar with from Windows, you can copy
an entire unit or insert it at any other
location in the program. Naturally, the
SELECT BLOCK function you know from
conversational programming is also
available for the copying and pasting of
multiple units.
Feed rate also possible as FZ/FU/FMAX
When specifying the feed rate, you can
also enter a revolution feed rate in mm/rev
or a cutting feed rate mm/tooth instead of
in mm/min.
6
smarT.NC: mid-program startup