Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Remove the bench and canopy acrylics.<br />
The bench acrylic is secured by (2) 1/4-<br />
20x1” Phillips screws at the front corners.<br />
Remove the screws and simply raise the<br />
acrylic slightly and pull free of the aluminum<br />
channel at the back.<br />
Five captive screws across the front of the<br />
canopy hold the canopy acrylic in place.<br />
Loosen these screws and the front channel<br />
will swing down. The screws will remain in<br />
the channel. Swing the channel down farther<br />
to release the acrylic and lower the acrylic<br />
to clear the handle.<br />
8 - Epic 442 Assembly and User Manual<br />
Attached to the canopy acrylic are 2 exciters<br />
(speakers). Disconnect the white connector<br />
on the wiring harness running from these<br />
exciters into the <strong>bed</strong>.<br />
Now lift the acrylic out of the back aluminum<br />
channel.<br />
30065-02A
Change language