user manual - Tanning-bed-parts.com

More documents

Recommendations

Info

Install the body fan. First, slip the power cable through the hole in the left pedestal. Then engage the hanging clips and fi nally, secure with (2) #10-24x1/2” screws in the bottom mounting fl anges. 28 - Epic 442 Assembly and User Manual 30065-02A
30065-02A Connect all cables under the bench that were disconnected before. Remember, they are all keyed differently. If it doesn’t fi t, it connects to another harness. Here’s a checklist: Harness from canopy Wire Colors Connects to Canopy Power Blue, Red Contactor Box Face Tanners Multi-colored Face tanner ballast box Fan cord Black Cord from bench lamp box LED Red, Green, Blue, Yellow Harness from contactor box RJ-45 timer display Black RJ-45 outlet on timer box Exciters Red, Black Audio amp Ground wire Green Green wire from contactor box Bench lamp box Wire Colors Connects to Power Blue, Black Contactor Box Fan power in Red, Black Contactor box Fan cord to bench fans Red, Black Fans on back panel Fan cord to canopy Red, Black Cord from canopy Fan cord to face tanner box Red, Black Cord from face tanner ballast box LED Red, Green, Blue, Yellow Harness from contactor box Face tanner ballast box Wire Colors Connects to Power in Red, Black, White, Yellow Contactor Box Power out Multi-colored Harness from canopy Fan power Black Cord from bench lamp box Body Fan Wire Colors Connects to Power Blue, Black, Green/Yellow Contactor Box LED Red, Green, Blue, Yellow Harness from timer box Other Wire Colors Connects to LED to skirt panel Red, Green, Blue, Yellow Terminal block on skirt frame Remote White From timer box to remote board on back panel Mp3 jack Black Cord across front of lamp box to head pedestal Epic 442 Assembly and User Manual - 29
Page 1 and 2: user manual 30065-02A
Page 3 and 4: 30065-02A Thank you for purchasing
Page 5 and 6: 30065-02A Rayonnement ultraviolet.
Page 7 and 8: 30065-02A Disassembly Your new tann
Page 9 and 10: 30065-02A On top of the skirt are 4
Page 11 and 12: 30065-02A The body fan is held in p
Page 13 and 14: 30065-02A The front cross member is
Page 15 and 16: 30065-02A Close the canopy and rein
Page 17 and 18: 30065-02A On the back of the canopy
Page 19 and 20: 30065-02A The back panel attaches t
Page 21 and 22: 30065-02A Put the rear panel in pla
Page 23 and 24: 30065-02A Attach the canopy endcaps
Page 25 and 26: 30065-02A Pull the shipping pins ou
Page 27: 30065-02A Install the bench endcaps
Page 31 and 32: 30065-02A Slide the bench acrylic i
Page 33 and 34: 30065-02A Audio Your sunbed is equi
Page 35 and 36: 30065-02A Scenario 1 - T-Max® Mana
Page 37 and 38: 30065-02A Scenario 7 - Non T-Max®
Page 39 and 40: 30065-02A A B C D E F G H The Keypa
Page 41 and 42: 30065-02A Care and Maintenance Clea
Page 43 and 44: 30065-02A Removing/Replacing Face T
Page 45 and 46: 30065-02A ISSUE RESOLUTION My bed i
Page 47 and 48: 30065-02A Parameter Function Defaul

user manual - Tanning-bed-parts.com

Create successful ePaper yourself

Delete template?

Save as template?